Do You Carry Wheels that Will Work on My Eaton HO72 with Dually Setup?

Updated 05/14/2025 | Published 05/03/2025

Products Featured in This Question

Provider ST235/85R16 Tire with Silver Vesper Dual Wheel - 8 on 6-1/2

(19)

$382.03

Vesper Steel Dual Trailer Wheel - 16" x 6" - 8 on 6-1/2 - 4.77" Pilot - Silver

(267)

$132.27

Question:

Hello, im working on restoring a 66 c36 with a dually rear end on it and need to replace my rims, do you know if any of your rims would fit a Eaton ho72 rear end with drum brakes

asked by: Trenton S

Expert Reply:

Hello Trenton,

Base on my research, the Vesper Steel Dual Trailer Wheel - 16" x 6" - 8 on 6-1/2 - 4.77" Pilot - Silver # TA56FR should work for your Eaton HO72 rear axle on your 1966 C36.

To ensure the Vesper 16x6 steel dually wheels fit properly on your Eaton HO72 rear axle, there are a few key things to double-check. First, confirm that the axle uses the standard 8x6.5" bolt pattern, which is typical for HO72s. Just as important, the center hub bore of the axle should be no larger than 4.77", since these wheels are hub-piloted and rely on that fit for proper support.

Next, verify that the brake drums will clear the inside of the wheel barrel, especially if you're using oversized or non-original drums. For dually applications, the 5.35" offset on these wheels is designed to provide the necessary spacing between the inner and outer tires, but it’s still a good idea to check that there’s enough clearance to prevent the tires from rubbing. Lastly, confirm that the wheels’ 3,860 lb load rating meets or exceeds the rear axle’s weight rating.

We only have specialty trailer tires, so you will need to source those somewhere else. Just make sure they can fit a 16x6" wheel.

Did you just get this truck, or had it for a while and just getting around to it? My Dad restored a 1965 Chevy, I think he did a pretty fantastic job! I attached a picture for you to check out.

expert reply by: Kate F

Dad's Chevy
(click to enlarge)

Trenton S.

5/13/2025

Hi Kate, Everything lines up with the measurements of the rim so these should be a great fit thanks for the help. I bought the truck back in 2023 and have been doing a full rebuild of it, im just getting around to new rims and tires now that the rear ends done.