Do the 4-Step MORryde StepAbove RV Steps MR28RR Have Strut Assist?

Question

Question:

I have a 2013 Sunnybrook Raven. I am interested in fold-down steps. MR85RR should be the correct product, but is it available with strut assist?

asked by: Rick B

0

Expert Reply:

Hey Rick. The MORryde StepAbove RV Steps item # MR28RR do not have strut assist. You would need one like item # MR85RR that fits 27-3/4" to 28-1/4" wide doorways.

How wide is the doorway on your 2013 Sunnybrook Raven?

expert reply by: Jerred H

0

Rick B.

4/25/2025

It's 28.25 inches. The threshold height is 28".

Jerred H.

4/26/2025

@RickB Thanks for the information! The closest I can get to those dimensions with a strut assist set of steps is the MORryde item # MR65RR. This will fit your 28-1/4" doorway but it's designed for entry heights that are 31-1/2" - 37-1/2". The only fold down steps I have that fit your specifications are the Lippert SolidStep RV Steps item # LC733931.

Answer 1

The weight is 58 lbs for the 4-step MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways #MR88RR.

view full answer...

Answer 2

Hello Frank, thanks for reaching out. At this time we only offer two lift assist struts for the Lippert Solid Steps: - Replacement Lift Assist Strut for Lippert SolidStep Triple RV Steps - Narrow Door Frames #LC67UD (for Lippert SolidStep 3-step RV…

view full answer...

Answer 3

The MORryde StepAbove entry steps install inside your camper's doorframe, measure between the door frame flanges to determine your doorway width. The doorway threshold will be used as the mounting point, measure from the mounting point to the…

view full answer...

Answer 4

Our part number for the MORryde Step Above part #STP-212 is the part #MR88RR. If you wanted the strut assisted version you'd want the part #MR85RR instead. The strut assisted version is not quite as detachable as the strut assisted.

view full answer...

Answer 5

Hey Coy, the Global Link RV Baggage Door Slam Latch #295-000078 that you referenced does not come with a backing plate but we do offer it separately with the part #295-000017.

view full answer...

Answer 6

The steps are approximately 19.415" in width for the MORryde Flip Tread RV Steps #MR42UR. To get wider steps you would need to size up in mounting width to something like the #MR28RR, but would need to have enough room for the steps to properly…

view full answer...

Answer 7

If you are wanting to install the MORryde StepAbove RV Steps #MR98RR you would need to remove the shock rod/gas strut because it will interfere with the step clearance. You can use the Replacement Controlled Motion Hinge for RV Entry Door #LC95VR…

view full answer...

Answer 8

If you have a strut that attaches to the bottom of your RV door you'd have a hard time fitting a MORryde StepAbove part #MR26RR with it as it would interfere when trying to fold the step up. So what you'd most likely need to do is remove the…

view full answer...

Answer 9

Hello Darryl, thanks for reaching out. You can apply grease to the gooseneck ball, but you would not want to lubricate the pivot points on the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY48GR. Sadly, there is not much that can be…

view full answer...

Answer 10

The difference is between just the MORryde Locking RV Storage Box #MR43RR and when you add the brackets at their widest setting. Just the box measures 25-3/4" but when you add the mounting brackets is when you'll see that 27-3/4" width…

view full answer...

Answer 11

The Valterra EZ Valve Electric Waste Valve for RV Black Water Tank - 3" Hub to 3" Hub #E40B-8 can be installed horizontally as well as vertically without any issue. I reached out to my contact at Valterra to confirm and they absolutely can…

view full answer...