Length and Diameter of Replacement Coupler Pin Kit for Dexter Brake Actuators

Question

Question:

Can you teel me how long and the diameter of part number TK71-764-00? Thank you

asked by: Robert B

0

Expert Reply:

Hi Robert; the Replacement Coupler Pin Kit for Dexter Brake Actuators # TK71-764-00 is 3" long x 1/4" diameter.

expert reply by: Robin H

0

Replacement Coupler Pin Kit for Dexter Brake Actuators
(click to enlarge)

Robin H.

9/26/2025

Hey Robert, did the dimensions of the Replacement Coupler Pin Kit work out for your needs? I'm curious to know because it might help others who are looking for similar information.

Answer 1

The UFP 34044 is basically the Dexter DX7.5L A-60 part #DX89FR. The second number you mentioned is actually a phone number. But the #DX89FR would be an exact replacement for what you have.

view full answer...

Answer 2

The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…

view full answer...

Answer 3

Hey Robert, we actually have a lock that was made for locking A-60 couplers like the part #T4845000 that you referenced with the InfiniteRule part #IR82FR. This is a pin lock that fits through the hole just behind the coupler portion that attaches to…

view full answer...

Answer 4

Hey Mike, this is a great question but basically when etrailer spare lock part #e98892 is in the locked position it can't unthread at all. Even if you somehow grabbed the front of the lock and then used vice grips on the back to try and unthread…

view full answer...

Answer 5

Basically what the etrailer.com Spare Tire Lock #e98892 does is act as a lug nut that secures the wheel to the trailer so that if someone were to try and remove the wheel they'd not be able to loosen the lock unless they had the key. Check out…

view full answer...

Answer 6

As long as the wheel stud of your Honda CRV's spare tire carrier is no larger in diameter than 9/16 of an inch and the lug nuts are less than 1 inch tall, the Fulton Spare Tire Lock, #FSTL0603, will work for you. This lock has a tab that is…

view full answer...

Answer 7

At first glance that is a great idea but if you want to keep a trailer from being stolen your best defense is installing a lock or multiple locks so that potential thieves see that your rig is more challenging than the next. You mentioned Blue Ox but…

view full answer...

Answer 8

The Replacement Coupler Pin Kit for Titan/UFP Brake Actuators part #TK71-764-00 is 3" long x 1/4" diameter. I spoke with Dexter to confirm this for you.

view full answer...

Answer 9

Your TDE model LP7000 surge brake actuator will need to be entirely replaced as the master cylinder is no longer available for it. With this unique style coupler you will need either a Disc #DX63FR or Drum #DX53FR brake actuator which will need to be…

view full answer...

Answer 10

The reverse light pin on a traditional 7-way trailer connector, like part #PK11893 or a factory connector if that's what you have on your 2018 Ram, is the center pin. Take a look at the picture I attached that shows all the pin functions. To add…

view full answer...

Answer 11

Good question, and a 2012 Cadillac Escalade does not have a harness that will allow you to plug in a brake controller, but it does have the wires already run under the dash, regardless of if you have the factory 7-way or not. If you take a look at…

view full answer...

Answer 12

The Dexter DX7.5L A-60 Brake Actuator part #DX89FR for disc or part #DX33FR for drum will work to replace both a UFP A-60 or A-75 Brake Actuator so there will be no worried here. The A-60 is rated for 6K and the A-75 is rated for 7.5K. The Dexter…

view full answer...

Length and Diameter of Replacement Coupler Pin Kit for Dexter Brake Actuators

Product Page this Question was Asked From

Continue Researching