Do You Have Wiring for My 2025 Chevrolet Equinox ACTIV?

Question

Question:

Is Curt wire harness 56427 confirmed for 2025 equinox activ?

asked by: Hal T

0

Expert Reply:

Hello Hal,

Yes, we do have the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # C44FR as a confirmed fit for your 2025 Chevy Equinox. Are you still having issues with it not working?

I see that we do have a pre-order # C88RV, if the 56427 is not working then you most likely need the one with the relays they are currently designing.

If you placed the order with us on the 56427 please let me know the order number so I can get a return label sent to you.

expert reply by: Kate F

0

Hal T.

4/7/2025

Curt 56427 has been installed by Brantley Trailer in my 2025 Equinox. My question: is Curt 56427 electrically and physically the same as Curt C88RV?

Kate F.

4/7/2025

@HalT Yes Hal, the Curt part number for the # C88RV is 56427, we have to change the part number for our site because we carry for so many different manufacturers.

Hal T.

4/7/2025

@KateF Thank you for the quick and informative response.....

Kate F.

4/7/2025

@HalT My pleasure Hal!

Austin N.

9/18/2026

Wondering how they got this to work. I bought a wiring harness from AC Delco and it does not work.

Kate F.

9/21/2026

@AustinN The wiring has been a little finicky on the 2025 Chevy Equinox, so you are definitely not the only one who has run into this. The harness we have actually been able to get working properly is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C88RV. I would recommend going with the Curt harness rather than trying to make the ACDelco harness work.

Austin N.

9/21/2026

@KateF I’m sure it may depend on but do you think Curt will work in it’s natural state after the dealership updated the light control module or do you think we will have adjust the wires like some are saying. I’m taking my car to the dealership on Wednesday and want to prepare them for any situation. I took my car to another dealership and they simply couldn’t figure it out or didn’t make the effort to call GM for assistance.

Kate F.

9/21/2026

@AustinN After taking a closer look at the # C88RV, I see that the product is no longer active, which tells me there were issues with that one as well. I really wish Chevy hadn't made the wiring on the 2025 Equinox so sensitive because the aftermarket manufacturers have definitely had a hard time getting this figured out. At this point, the only option we have is the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # C44FR, and that will only work if your Equinox has the factory tow package. It looks like you may end up having to pay an arm and a leg through Chevy to get the correct wiring for your Equinox. I am very sorry about that, and hopefully the dealership you're going to Wednesday has better luck getting you some answers. If you remember, please let me know what they find out, we are eager to know!

Answer 1

William yes, I can confirm that the Curt T-Connector Vehicle Wiring Harness #C88RV is what you'd need for your 2025 Chevrolet Equinox. If you're needing help with anything else, feel free to drop a comment before you go!

view full answer...

Answer 2

Hello Andrew. It looks like our installers have not had the privilege of doing an install on a 2025 Chevy Equinox. I see that the wiring harnesses that we do have in stock have the 6 pin connector. It looks like Curt is aware of this issue and is in…

view full answer...

Answer 3

Hi Ashley; we do have a hitch and wiring for your 2025 Chevy Equinox. I recommend the following: -etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e59ZR -Curt T-Connector Vehicle Wiring Harness #C44FR I really…

view full answer...

Answer 4

Hey Byron! You'll be able to use both the Curt Hitch #C89RV and Wiring #C44FR for your 2025 Chevy Equinox EV. We say that the wiring requires the OEM package, but the Curt guide says it fits without having the OE package. If you check out the…

view full answer...

Answer 5

Hi Peter; this is a bit of a hot topic right now. If you 100% for sure have the tow package on your 2025 Equinox you should be able to use the #C44FR. However, we have had some people have issues with this on the vehicle side. I'm not sure if…

view full answer...

Answer 6

Hey Bill, so the hitch ( #C98CR ) you mention will fit a 2025 Equinox, but right now there are no custom fit wiring harnesses. So, your only option on that front would be to use a universal harness like the Curt Powered Tail Light Converter with…

view full answer...

Answer 7

The plug you found at the back of your 2024 Cadillac XT4 should match up with the Curt T-Connector #C44FR and will only show power when the running lights are on, the turn signals are used, or you are pressing the brake pedal. If you're testing…

view full answer...

Answer 8

To splice in a trailer end connector such as the 4-Pole Trailer End Connector #18004 or Hopkins Endurance Easy-Pull Harness w/ 4-Pole Flat Connector - Trailer End #HM38134 you will need to match the connector to your wires by function. On these…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Do You Have Wiring for My 2025 Chevrolet Equinox ACTIV?

Products Featured in This Question

Continue Researching