What Replacement L-Pins Will Work with My Fastway E2 Weight Distribution Hitch with Flat End Springs
Updated 04/01/2025 | Published 03/24/2025
Products Featured in This Question
Question:
I am looking for replacement clips for my E2 equalizer hitch. I am needing the L shaped pins that hold down the flat bars. All the pins I see look like the hole placement for cotter pin is lower and more designed for the newer square bars. Do you have the L shaped pins that are designed to hold down the flat bars that were used in the older flat bar version of the E2?
asked by: Roman C
Expert Reply:
Hello Roman,
The E2 is a great Weight Distribution Hitch! For the Fastway E2 with the flat bars at the end (please refer to image that I attached) you are going to want the Replacement Hardware Kit for Fastway Sway Control Brackets # FA92-02-9200. This repair kit will work on the 6,000-lb, 8,000-lb, 10,000-lb, or 12,000-lb Fastway e2 weight distribution system. We do not have L-pins separate so you are going to get a few extra parts, but who knows those extra parts might come in handy one day when you are on the road.
What happened to your other L-pins, misplaced?
(click to enlarge)
Product Page this Question was Asked From
Replacement L-Bracket Plates for Blue Ox TrackPro and 2-Point Weight Distribution - Qty 2
- Accessories and Parts
- Weight Distribution Hitch
- Frame Bracket
- Brackets
- 2-Point
- TrackPro
- L-Bracket
- Blue Ox
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: lippert window latch
- Search Results: k99~060~20
- Shop: Trailer Hitch
- Shop: Replacement L-Pin for Fastway e2 Weight Distribution Systems
- Shop: Trailer Axle w/ Electric Brakes - 4" Drop - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Shop: Windshield Wiper Blades
- Shop: Dexter DX Series Electric Over Hydraulic Brake Actuator for Disc Brakes - 1,600 psi
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Shop: 12V RV LED Puck Light - Surface Mount - 3" Diameter - Black Trim
- Shop: Replacement Heavy-Duty L-Pin and Clip for Curt TruTrack Weight Distribution System w/ Sway Control
- Search Results: brake line
- Search Results: hydraulic brake lines
- Search Results: trailer brakes accessories and parts
- Video: Curt Weight Distribution C17513 Review
- Video: Hands-On with the Replacement L-Pin for Fastway e2 Weight Distribution Systems
- Search Results: curt weight distribution hitch parts
- Search Results: 4 pole wiring harness
- Q&A: Measurements For Equal-i-zer Replacement L-Pin # EQ95-01-9430
- Video: Review of Blue Ox Weight Distribution Hitch - Replacement L-Bracket Plates - BLU42QR
- Video: Curt Weight Distribution C17508 Review
- Video: Review of Equal-i-zer Replacement Parts - L Pins - EQ95-01-9430
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: How to Choose a Trailer Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
on Accessories and Parts
Roman
3/31/2025
Yes Kate, we actually lost just one of the clips. We were teaching our 12 year old son how to set up the sway bars and while taking them off he placed one of the clips on the rear bumper. From there, no one know what happen.