Recommended Trailer Wiring and Brake Controller for a 1999 Dodge Ram 2500

Question

Question:

I have a 1999 dodge 2500. It did not come equipped with the factory tow package. I need the 7 blade connector as well as trailer brake controller. What do you recommend? Thanks

asked by: Cory J

0

Expert Reply:

Hey Cory, thanks for reaching out!

I'd be more than happy to help you get your 1999 Dodge Ram 2500 set up for trailer towing! Here are the parts you'll need:

- T-One Vehicle Wiring Harness # 118329
- Universal Wiring Upgrade # ETBC7
- Mount Bracket # 18136
- Prodigy P2 Brake Controller # 90885

The T-One tees in behind your taillights and then the ETBC7 wiring comes with everything you need to get a fully functioning 7-Way and additional wiring to make sure your brake controller is installed. And then I really like the Prodigy P2 controller because it is a tried-and-true controller that's just straight-forward and easy to use.

I've attached some installation videos as well as a helpful article we've written about installing a brake controller from scratch on a Dodge Ram truck in your model year range.

Let me know if you end up having any other questions!

expert reply by: Jon G

0

Cory

3/15/2025

Thanks for the reply- the brake controller says out of stock until May 15, is that correct? I can’t wait two months. Thank you!

Jon G.

3/15/2025

@Cory Oh wow, I didn't even realize the date was that far out! In that case, I recommend checking out the Prodigy P3 # 90195 which is just the next version of the Prodigy lineup and comes with a few extra settings.

Answer 1

In order to install a Tekonsha Trailer Brake Controller like the Prodigy P3 part #90195 on a 1997 Dodge Ram 1500 you'll need to use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part #3020-P. This will be all that is needed…

view full answer...

Answer 2

The Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket for Dodge/Chrysler #PK11893-11933 will fit 1999 Dodge Ram 2500's that came with a 7-way connection from the factory. The 7-way socket will require drilling of new holes as it does…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Recommended Trailer Wiring and Brake Controller for a 1999 Dodge Ram 2500

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching