Replacement Hubs and Brakes for Dexter 6K Axle
Updated 10/27/2025 | Published 03/10/2025
Products Featured in This Question
Question:
I have a Dexter axle 6760401 s/n 133154526. Looking for complete brakes and possible bearings and drums. Not sure which ones to get. Any help would be appreciated.
asked by: Bill B
(click to enlarge)
Expert Reply:
Hey Bill, thanks for reaching out and providing your photo!
I was able to get ahold of my contact at Dexter Axle and confirm these parts will work for you:
- etrailer Electric Trailer Brakes # AKEBRK-7-SA (1 per axle)
- Easy Grease Trailer Hub and Drum Assembly # AKHD-655-6-EZ-K (2 per axle)
- Grease Seal Kit # RG06-090 (1 per axle)
The grease seals that come with our hub assembly will be slightly too big for your trailer spindles, so you'll need to swap them out to the kit that I added to the list. Aside from that the installation will be pretty straightforward!
Is there anything else you're needing to replace while you're at it?
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: dexter seal 10 36
- Search Results: marine wheel bearing grease
- Q&A: Replacement Bearings and Seal for Dexter 6,000 Pound Axle
- Search Results: trailair
- Search Results: axle bearing kit
- Search Results: dexter axle bearing kit
- Shop: Lippert Unitized Oil Seals - ID 2.25" / 3.376" OD for 5,200-lb to 8,000-lb Axles - Qty 2
- Shop: Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Shop: Lippert Trailer Suspension Wet Shoulder Bolt - 9/16" x 2-13/16" - Qty 4
- Video: Complete Breakdown of the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles
- Video: The Low-Down on the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles
- Q&A: How Do I Figure Out What Equalizer Upgrade Works For My Trailer?
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7-1/16" Long U-Bolts
- Shop: Lippert Road Armor Shock-Absorbing Equalizer Kit - Tandem Axle - 3,500-8,000 lbs
- Video: Review of Dexter Trailer Suspension Parts - HD Upgrade Kit Single Axle Trailer - K71-358-00
- Q&A: Determining Hanger Spacing for Replacement Leaf Springs on Trailer
- Q&A: Which MORryde AllTrek 4000 Equalizers Do I Need for a 36" Wheelbase?
- Article: Still Rocking After Leveling? How to Stabilize Your RV for Good
- Shop: Camper Tie-Downs
- Shop: LubriMatic Marine Trailer Wheel Bearing Grease - 3 oz. Cartridges - Qty 3
- Video: Hands-On with the MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track
- Video: Review of Dexter Trailer Bearings Races Seals Caps - Bearings - DX26ER
- Shop: Vehicle Lights
- Q&A: What Exactly Does a 6 on 5-1/2 Inch Wheel Bolt Pattern Mean
- Q&A: Availability of Replacement Backing Plate for 4,400 lb Lippert Drum Brakes
- Q&A: Replacement Bearings and Seal for Lippert 4,400 lb Trailer Axle
- Shop: RV Interior Lighting
- Search Results: trailer hitch
- Shop: Trailer Hitch
on Trailer Brakes
Jon G.
10/27/2025
Hey Bill, how did the new electric brakes and hub assemblies work out on your Dexter axle? Your update could make it easier for others trying to match parts to their axle numbers.