Availability Of Trailer Hitch For 2015 Lexus LX 570

Question

Question:

I have 2015 lexus 570lx, which is vvvery similar to 2015 toyota landcruiser...the front hitch for that landcruiser is confirmed to fit the landcruiser...would it fit the lexus 570LX same year, 2015? pls advise, thx

asked by: Peter

0

Expert Reply:

Hello Peter, thanks for reaching out. The Curt Front Hitch # 31198 you mentioned is for the 2008-2018 Toyota Land Cruiser, 2008-2021 Toyota Sequoia and 2007-2021 Toyota Tundra. This has not been tested on a Lexus LX 570, so we cannot confirm fitment. The frame should be similar but it looks like the front bumper is different so that would be a problem for the front hitch. I have included dimensions of the # 31198 front hitch for you below, if you want to compare this to your vehicle. In all likelihood it would not fit though, and the only option for a front hitch (or rear hitch) would be to have a welder fabricate something for you. There are no custom fit hitches made for the 2015 Lexus LX 570 at this time.

expert reply by: Jesse M

0

31198 Dimensions
(click to enlarge)

Peter

3/11/2025

I measured 34" center to center of bolt holes width, and 2 1/4" on center front to back. top of receiver to top of frame mount seems close...do you have something close? thx

Jesse M.

3/11/2025

@Peter Thats what I was afraid of. Sadly, no, there is no other hitch we can offer for your Lexus. The only option would be to have something fabricated to fit.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 11

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Availability Of Trailer Hitch For 2015 Lexus LX 570

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching