Trailer Hitch that Fits 2025 Hyundai Sonata Hybrid

Question

Question:

Code: C37RV This is for the Hyundai Santa Fe. Will it also work for the Santa Fe Hybrid model?

asked by: Brian E

0

Expert Reply:

Hey Brian, yes the Curt hitch part # C37RV does fit the hybrid models of the 2025 Hyundai Santa Fe. What do you plan on using the hitch for? Towing?

expert reply by: Jameson C

0

Hitch Installed Santa Fe Hybrid
(click to enlarge)

Brian

3/2/2025

Thanks for the quick response. Hitch mount carriers (for e-bikes) and utility trailer towing. The hybrid model is rated at 2000lb towing, the models with the turbo are rated at 3500lb and the XRT trim at 4500lb. Since the hitch is the same for all models, would you assume that the difference in towing is due to just the powertrains? Thus, since the Curt hitch is rated to 600lb tongue wt, can I assume that I could put about 350lb (10% of the higher tow capacities) on the hitch carrier as long as I don't exceed the hybrid GVWR?

Jameson C.

3/3/2025

@Brian The hitches are all independently rated from the vehicles so based on the version of the vehicle you'd need to go by the lowest rated portion of the towing setup which would be the vehicle. I do think your logic makes sense on the tongue weight portion though although we can't really give you altered vehicle towing capacities as only the manufacturer of the vehicle can.

Answer 1

Hey Chris, the CURT Class 3 Trailer Hitch #C37RV won't require any bumper modification, but the etrailer Class 3 Trailer Hitch will require some underbody panels/fascia to be trimmed for install.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Trailer Hitch that Fits 2025 Hyundai Sonata Hybrid

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching