2024 Audi Q5 Sportback Trailer Wiring Recommendation

Question

Question:

I have a 2024 Audi Q5 Sportback. I had an after market trailer hitch installed and need a wiring harness. I have been told that you have to have an Audi trailer hitch installed with the wiring harness to get it to work. Is this true? Do you have. an option? Thank you

asked by: Tom B

0

Expert Reply:

Hey Tom, thanks for reaching out!

The Tekonsha Wiring Kit # 119147KIT will work great on your 2024 Audi Q5 Sportback. It isn't "Audi" brand, but Tekonsha has the most reliable wiring on the market so you can be confident it will last a long time.

Are you planning on using the SQ5 for towing, or are you needing it for something else?

expert reply by: Jon G

0

Tom

2/11/2025

Towing a small utility trailer. I did place an order for that harness. Will I need a mechanic to install?

Jon G.

2/11/2025

@Tom Sounds good! Just checking to see if you were already set up with a ball mount as well is all. This harness splices into the wiring on your Audi so if you aren't confident cutting and splicing you might consider having a shop do the installation for you, but if you're a DIYer you'll be just fine.

Jared

6/5/2026

@JonG I need one as well. Do you know which wires on the harness are for brake and signal for this vehicle?

Answer 1

I have a way to use the existing 4-way wiring but you are correct it does involve changing to a 6-pin on your Jeep. In order to add a charge line to your setup the best solution will be to use the Roadmaster 7-Wire to 6-Wire Flexo-Coil Kit item…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

2024 Audi Q5 Sportback Trailer Wiring Recommendation

Featured Help Information

Miscellaneous Media

Continue Researching