Do You Have a 1 1/4" Receiver Hitch for My 2025 Hyundai Kona so I can Use My Bike Rack?

Question

Question:

Good morning. Do you folks make a 2024-2025 Hyundai Kona Class 1 trailer hitch? All I see are class 2 + 3 hitches, and I want a 1-1/4 light duty for my bicycle rack. Thanks,

asked by: Tim O

0

Expert Reply:

Hello Tim,

I take it you already have the bike rack which is why you are looking for the 1 1/4" receiver. We only have the 2" receiver for the 2024 Hyundai Kona but that's ok because we can make it work.

If your Kona is the Electric, N Line, and N models you will want the Curt Trailer Hitch Receiver - Custom Fit - 2" # C43RV.

If your Kona is NOT the Electric, N Line, and N models you will want the Curt Trailer Hitch Receiver - Custom Fit - 2" # C39RV or the Draw-tite one you were looking at # DT46KV.

In order to use your bike rack, you can grab a Trailer Hitch Reducer # e63YR which is going to fit inside the 2" receiver to make it a 1 1/4" receiver.

Do you have a favorite trial that you like to ride on?

expert reply by: Kate F

0

Timothy

2/11/2025

Hi, and thanks for the fast reply. That's helpful. Thanks again Tim

Kate F.

2/12/2025

@Timothy Anytime Tim! Hope you have a great rest of the week =)

Joshuaj

6/30/2025

Does the muffler have to be taken off in order to install? I ordered the C43RV for my ‘24 N-line. Or are you saying this is for the electric N-line model? I have the non electric N-line Kona.

Kate F.

7/1/2025

@Joshuaj When I look at the instructions it states that if the vehicle has an exhaust it will need to be lowered. So if your 24 N-Line has an exhaust, you will need to lower it for installation, and then reinstall it.

Joshuaj

7/1/2025

@KateF Ah ok. That makes sense. Was it supposed to come with instructions? If not, it might be helpful to mention it on the item’s listing. The the muffler needs to be lowered for install. There are only pictures of it installed on the electric model. Thank you for the quick reply!!

Kate F.

7/2/2025

@Joshuaj Yes, they should have come with instructions, my apologies that they were not there. I tried to attach the instructions for the Curt Trailer Hitch Receiver - Custom Fit - 2" # C43RV, but they won't attach for some reason. I am going to send you a private email so you have a copy of them. Please let me know if you need anything else.

Answer 1

Hello Luke. Yes, the Curt Hitch #C43RV will indeed fit the 2025 Hyundai Kona Electric. Curt confirms this to fit the EV and N Line models of the 2025 Kona.

view full answer...

Answer 2

Hey Peter, we have a hitch that fits your 2024 Hyundai Kona Electric with the Curt part #C43RV. The hitch you referenced does not fit the Electric models. What are you going to use the hitch for?

view full answer...

Answer 3

Andrew, are you referring to the Curt Trailer Hitch #C11529? If so, then that'd explain why it does not fit - because it's not meant for your car. You should've been using either the CURT Class 3 Trailer Hitch #C39RV if you don't have…

view full answer...

Answer 4

Hay Zahar, thanks for reaching out! The correct hitch for your 2024 Hyundai Kona EV is the Curt Trailer Hitch Receiver #C43RV, and while this will require some fascia trimming, it won't require you to drill into your vehicle frame as it's a…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Do You Have a 1 1/4" Receiver Hitch for My 2025 Hyundai Kona so I can Use My Bike Rack?

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching