Is There a Hitch that Fits 2024 Kona Electric

Question

Question:

I have a 2024 Kona Electric - will this hitch fit? There is no muffler to move, but there is a cover that most likely would need cutting.

asked by: Peter

0

Expert Reply:

Hey Peter, we have a hitch that fits your 2024 Hyundai Kona Electric with the Curt part # C43RV. The hitch you referenced does not fit the Electric models.

What are you going to use the hitch for?

expert reply by: Jameson C

0

Jameson C.

10/30/2025

Hey Peter, how did the Curt hitch work out on your Kona Electric? Your update could make it easier for others looking for a fit on the same model.

Peter

10/30/2025

@JamesonC Jameson, the hitch works great. It was easy to install and the bit of cutting on the plastic shroud was easily done with a jigsaw. I use it with a 2” hitch mounted bike rack.

Jameson C.

10/30/2025

@Peter Nice! What bikes and bike rack do you have?

Answer 1

Hello Luke. Yes, the Curt Hitch #C43RV will indeed fit the 2025 Hyundai Kona Electric. Curt confirms this to fit the EV and N Line models of the 2025 Kona.

view full answer...

Answer 2

Hello Tim, I take it you already have the bike rack which is why you are looking for the 1 1/4" receiver. We only have the 2" receiver for the 2024 Hyundai Kona but that's ok because we can make it work. If your Kona is the Electric, N…

view full answer...

Answer 3

Andrew, are you referring to the Curt Trailer Hitch #C11529? If so, then that'd explain why it does not fit - because it's not meant for your car. You should've been using either the CURT Class 3 Trailer Hitch #C39RV if you don't have…

view full answer...

Answer 4

Hay Zahar, thanks for reaching out! The correct hitch for your 2024 Hyundai Kona EV is the Curt Trailer Hitch Receiver #C43RV, and while this will require some fascia trimming, it won't require you to drill into your vehicle frame as it's a…

view full answer...

Answer 5

We sure do! The etrailer Electric Trailer Brakes item #AKEBRK-35 work with 3,500 lbs axles that have a 4 bolt mounting flange. These left and right 10" x 2-1/4" assemblies have rust-resistant, e-coated backing plates that work with 15"…

view full answer...

Answer 6

The only real difference between the Draw-Tite #65052 and Curt #C31012 is the style in which they bolt to the frame. The Draw-Tite is going to have a bolt on each frame rail and one on the crossmember, whereas the Curt is going to have three bolts on…

view full answer...

Answer 7

The recommended solution for installing a hitch where the bolts all don't seem to perfectly line up is to first start each install bolt and leave it as loose as possible. This gives you a bit more leeway to compensate for holes that don't…

view full answer...

Answer 8

It's not uncommon for hitches to get bent in shipping which makes the mounting holes not line up as easily as they should. So if the holes are off only by a little bit what you can do is start all of the bolts loose and then torque them down and…

view full answer...

Answer 9

I spoke with my contact at B&W regarding the Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit #BWGNRK1116 referenced in your question. She stated that the estimated/average installation time for this kit is around 2 hours.…

view full answer...

Is There a Hitch that Fits 2024 Kona Electric

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching