What Size Fuse Is Required For The Roadmaster Even Brake ICX Transmitter

Question

Question:

Is the online fuse 2amp? Why i ask is the transmitter has interfered with my 2024 Jeep Gladiator. It interfered with the key fobs lock unlock. The diagnostics discovered this cause and took out the inline fuse. I think it was 2 amp. Is that correct?

asked by: Mark

0

Expert Reply:

Hey Mark,

The Replacement Transmitter for Roadmaster Even Brake Systems - Serial Numbers Above 27,496 # RM77FR uses a 10 amp fuse. I'm guessing that the installer tied into the fuse that powers the sensor for the key fobs. You can look for a different ignition-tied fuse to avoid this issue going further.

expert reply by: Kevin C

0

Mark

11/19/2024

No, the wire was direct to the battery

Kevin C.

11/19/2024

@Mark That's odd that it would still affect the key fob then. Could you share more about what you found with the diagnostic report to help others that might be experiencing the same issue?

Answer 1

GM states in the owner's manual that to recreationally tow the vehicle, the negative battery cable must be disconnected. The owner's manual doesn't list a specific reason, it only states that failure to do so could damage the vehicle. The…

view full answer...

Answer 2

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 3

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 4

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 5

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 6

Hi Ken! It looks like you have almost everything you need to set up your 2026 Jeep Gladiator Sahara for flat towing. The etrailer Invisible Base Plate Kit - Removable Arms #e98948 is a perfect fit and the etrailer XHD Non-Binding Tow Bar - RV Mount -…

view full answer...

Answer 7

I sure can Galen, and thanks for the information. Since your Tiffin motorhome has the air line connection you'll need the Demco Air Force One Flat Tow Brake System for 2020 and Newer Tiffin Chassis RVs w/Factory Air Brakes item #DM55MV. This…

view full answer...

Answer 8

Hey Terry, the Blue Ox Avail BX7421 our part number #BLU28QV is the current version of the Avail whereas the 7420 was the initial version. Only real difference is the finish. The 7421 has a newer finish that's a bit more durable but other than…

view full answer...

Answer 9

Yes, it will! You'll want to cut off the 4-way connector of the Curt Custom Tail Light Wiring Kit for Towed Vehicles item #C96JR and install the 6-way connector that comes with the Curt Tow Bar 7-Way to 6-Way Coiled Adapter Cord w/ 6-Way Socket…

view full answer...

Answer 10

Hey Bob, you are definitely thinking in the right direction adding rear support with that much constant weight back there. Between the 320 lbs you’re carrying full time, another 200 lbs with the kayaks, and up to 500 lbs of tongue weight, you’re…

view full answer...

Answer 11

Hey Alan! It looks like you already ordered the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5, which is compatible with the factory plastic and steel bumper. This will work with your existing Roadmaster Nighthawk #RM-676. The wiring kit…

view full answer...

Answer 12

Hey Justin! The Gen-Y Voyager Torsion-Flex 1-Ball Mount #GY92JJ you were looking at would be a great option and the one I recommend. This takes a 1" diameter shank so it will work with your DO35 tow pin. The tongue weight capacity for towing is…

view full answer...

What Size Fuse Is Required For The Roadmaster Even Brake ICX Transmitter

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching