Customers prefer these similar products
This aluminum tow bar is the absolutely snazziest tow bar you can get. Sleek, lightweight, with built-in LEDs for increased visibility and safe driving at night. The electrical cord comes installed in the cable guide, keeping your setup organized.
Features:
Specs:
This is the coolest feature you didn't know you needed. These built-in LEDs don't just look dope - they're great for safety too, especially when you're driving at night. They light up the space between your RV and your toad (towed vehicle) and alert other drivers to the fact that you're towing a vehicle behind your RV. You definitely want to avoid an inattentive driver trying to merge right into the middle of your setup.
They also come in handy when you get to your campsite after dark and you want to unhook. These LEDs are more than bright enough for you to see what you're doing.
It's all extra snazz with no extra work. When you plug the power cord into your RV's 7-way to flat tow, the LEDs will have power. Turn on your RV's taillights and the LEDs come on too. Simple as that.
The Nighthawk is designed to make hooking up your toad a smooth and easy process. The telescoping arms are able to extend to the needed length and angle to reach the base plate without the need for your vehicle to be perfectly level or in the exact right spot behind your RV. The inner arms are stainless steel and will slide in and out smoothly. Supremely corrosion resistant, they'll stay rust-free and functional for the life of the tow bar.
Slide the tow bar into your hitch and pin it in place. Get the arms connected to the base plate one at a time. Once you're all hooked up, slowly pull forward and the self-aligning arms will fully extend and lock into the towing position. Double check that the arms are properly latched and you'll be ready to hit the road!
The Nighthawk's arms are longer than average, giving you an above-average turning radius. You're going to be able to get around obstacles and make sharp turns with no worry of clipping the corner of your RV. Maneuver through gas stations and the campsite no problem.
Uneven ground and sharp angles can put the arms of the tow bar in a bind and make them stiff and immoveable. Once you get to your destination, the last thing you need is to spend several minutes wrestling, yanking, and kicking at them to get your car disconnected.
Instead, get out of a bind in one easy step. Simply pull up on the lever on the arm of the Nighthawk to disengage the internal latch. This releases the pent-up pressure so you can unhook and get on with your adventure.
The Nighthawk comes with cable guides built into the arms, keeping your setup streamlined and organized. The power cord will come pre-installed in the cable guide, protecting it from getting damaged or tangled. It's also a great way to keep all your gear together. You won't need to find a separate place to store your power cord; you can keep it right there where you need it, ready for the next time you flat tow.
You can thread the safety cables through the guides as well, which will likewise protect them from damage and make them easy to store.
The Nighthawk is engineered to be as tough and durable as possible. Throughout the design process, rigorous physical and computerized testing is done, including Finite Elemental Analysis (FEA). Each of these tests displays a 3-dimensional image of the tow bar while it is put under thousands of pounds of pressure. Areas of stress in the tow bar can then be located and studied so that those areas can be strengthened. This process is repeated until any weak spots, particularly those found in load-bearing components, are completely removed. The result is a product that is durable, strong, and safe.
The Nighthawk folds up to conveniently store on the back of your RV when you're not using it. After disconnecting the tow bar from your toad, push the arms of the tow bar together so that they are side by side. Push the tow bar up until the holding latch clicks into place. The arms can then swing to the right or to the left, whichever side you want to store it on.
For added protection from the elements, slip the Roadmaster tow bar cover (RM-055-3 - sold separately) over the tow bar when you're not using it.
Flat towing can be a much more convenient way to take your car RVing with you than using a trailer or a tow dolly. It'll save you storage space both at home and at the campsite, and it takes less time and hassle to hook up.
To flat tow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flat tow braking system.
| For the RV | Between the RV and Towed Car | For the Towed Car |
|---|---|---|
| Hitch | Tow bar | Base plate |
| Wiring plug | Safety cables | Braking system |
| Wiring adapter cord | Wiring kit/diodes |
The custom-fit base plate installs on the frame of your toad so you can connect the car to your RV with a tow bar. Hook up safety cables between the vehicles to ensure that the toad does not separate from the motorhome if the tow bar becomes detached. Tow bar wiring syncs your vehicle's signal lights with your motorhome's tail lights, as required by law in most states. Finally, the flat tow braking system - also required in most states - activates the brakes in the toad when you hit the brakes in the RV, making for smoother, safer braking, and preventing wear on your motorhome.
California residents: click here
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.