Is The Dexstar Conventional Steel Wheel AM20758 Tubeless Or Tube Type?

Question

Question:

Hello! Is this wheel tubeless or tube type? Thank you.

asked by: Cory

0

Expert Reply:

Hello Cory. The Dexstar Conventional Steel Wheel # AM20758 is meant to be used with a tubeless trailer tire. Virtually all trailer tires/wheels made these days are tubeless.

expert reply by: Jesse M

0

Jesse M.

12/15/2025

Hey Cory, how did the Dexstar steel wheel work out with your tubeless trailer tire? Knowing how it performed could help others choosing the same setup.

Answer 1

Yes, it will Beau. The Dexstar Conventional Steel Wheel w/ +0.5" Offset - 16" x 6" Rim - 8 on 6-1/2 item #AM20766 has the lip built into it to work with a 12" Diameter Baby Moon Hubcap like item #PX1309SS. What kind of vehicle or…

view full answer...

Answer 2

Do you see the three raised bumps on the center circle section of your wheel? That's where a baby moon like the part #AM90086 fits over. You need to measure that diameter. If it's right at 9-1/4 inch this cover is what you'd need.

view full answer...

Answer 3

Hey Tom! I would love to help you with your restoration project but all we have are trailer tires. The Dexstar Conventional Steel Wheel w/ +0.5" Offset - 16" x 6" Rim - 8 on 6-1/2 - item #AM20766 get used all the time for projects like…

view full answer...

Answer 4

The Dexstar Conventional Steel Wheel #AM20766 will accept the Phoenix USA Baby Moon Hubcap #PX1309SS without modification. This hub cap is stainless steel so it will not flake or peel like some chrome hub caps.

view full answer...

Answer 5

Hey Eric, all of the trailer wheels we carry including the part #AM20353 that you referenced only work with tubeless tires. We don't have anything that works with tubes. Have you been running a tube setup currently?

view full answer...

Answer 6

Hey Scott, the trailer wheel part #DEX69FR that you referenced is designed to be used with the standard trailer wheel lug nut size of 1/2-20 like our part #LHLR103. This is the most common lug nut size.

view full answer...

Answer 7

The Dexstar Conventional Steel Wheel part #AM20758 has a zero offset which means the mounting surface is centered in the middle of the wheel. The term backspacing refers to the distance from the hub mounting surface to the inside lip of the wheel.…

view full answer...

Answer 8

We have the Dexstar Conventional Steel Wheel, #AM20758, in stock so I went out to the warehouse to get an exact measurement for you. The outside diameter of the inner ring of this wheel is 11-1/2 inches including the nibs.

view full answer...

Answer 9

Typically, trailer wheels will not work on a vehicle but if you have a 6 on 5-1/2 bolt pattern on your hub and need 16 inch wheels then the #AM20758 may work great for you. Another thing to make sure of is if you have an offset on your wheels. The…

view full answer...

Answer 10

The wheel bolt hole diameters of the #AM20758 is just slightly over 1/2 inch which allows only 1/2 inch wheel studs to fit through. You wouldn't be able to fit a 9/16 inch or larger stud through the hole. The lug nuts to be used with this wheel…

view full answer...

Answer 11

The only 16" wheel that we currently have with a 6 on 5-1/2" bolt pattern and a offset is the Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel #AM22657 but since this is a negative offset that puts the wheel just over 1/4" further away…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Is The Dexstar Conventional Steel Wheel AM20758 Tubeless Or Tube Type?

Product Page this Question was Asked From

Continue Researching