Baby Moon Hubcap Compatible With Dexstar Conventional Steel Wheel # AM20766

Question

Question:

Does the above rim need to be modified in any way to utilize the hub caps/baby moons you all sell? Thank you

asked by: Robert H

0

Expert Reply:

The Dexstar Conventional Steel Wheel # AM20766 will accept the Phoenix USA Baby Moon Hubcap # PX1309SS without modification. This hub cap is stainless steel so it will not flake or peel like some chrome hub caps.

expert reply by: Bud M

0

Answer 1

Yes, it will Beau. The Dexstar Conventional Steel Wheel w/ +0.5" Offset - 16" x 6" Rim - 8 on 6-1/2 item #AM20766 has the lip built into it to work with a 12" Diameter Baby Moon Hubcap like item #PX1309SS. What kind of vehicle or…

view full answer...

Answer 2

Hey Tom! I would love to help you with your restoration project but all we have are trailer tires. The Dexstar Conventional Steel Wheel w/ +0.5" Offset - 16" x 6" Rim - 8 on 6-1/2 - item #AM20766 get used all the time for projects like…

view full answer...

Answer 3

Do you see the three raised bumps on the center circle section of your wheel? That's where a baby moon like the part #AM90086 fits over. You need to measure that diameter. If it's right at 9-1/4 inch this cover is what you'd need.

view full answer...

Answer 4

Hello Cory. The Dexstar Conventional Steel Wheel #AM20758 is meant to be used with a tubeless trailer tire. Virtually all trailer tires/wheels made these days are tubeless.

view full answer...

Answer 5

Hey Scott, the trailer wheel part #DEX69FR that you referenced is designed to be used with the standard trailer wheel lug nut size of 1/2-20 like our part #LHLR103. This is the most common lug nut size.

view full answer...

Answer 6

Hey Eric, all of the trailer wheels we carry including the part #AM20353 that you referenced only work with tubeless tires. We don't have anything that works with tubes. Have you been running a tube setup currently?

view full answer...

Answer 7

To determine whether or not the Dexstar Conventional Steel Wheel w/ +0.5" Offset #AM20766 will fit your 1952 GMC Pickup you will simply need to compare the specs. The rim dimensions are 16" diameter x 6" wide Bolt pattern is 8 on 6-1/2…

view full answer...

Answer 8

Yes! The part you're looking for is the Dexstar Conventional Steel Wheel w/ +0.5" Offset - 16" x 6" Rim - 8 on 6-1/2 - Black #AM20766.

view full answer...

Answer 9

Hey Brett, If your wheel bolt pattern is 8 on 6-1/2" then the Phoenix USA Baby Moon Hubcap #PX1309SS should be the right fit for your 1971 GMC C/K 2500.

view full answer...

Answer 10

there isn't a guide to tell us the size of the hubcaps needed for your 2021 Gulf Stream Vintage Cruiser 19ERD travel trailer, but I do have a few options to choose from below once you've measured your wheel diameter and lug-nut bolt pattern:…

view full answer...

Answer 11

I believe the wheel that they are refering to is the Dexstar Conventional Steel Wheel #AM20766. This has the same 8 on 6-1/2" lug pattern that the 1953 Chevrolet Advance Design Trucks had. This wheel is only 16" in diameter where the…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Baby Moon Hubcap Compatible With Dexstar Conventional Steel Wheel # AM20766

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching