What's Advantage of Over Under Kit Over Replacing Axle
Updated 12/15/2025 | Published 11/04/2024
Question:
Hello, I believe the same 4”-6” clearance gain can be achieved by replacing a axle with a straight one. What would be pros and cons of replacing the axle as opposed to using the over/under conversion kit with my existing axle? Thanks!
asked by: Alex
0
Expert Reply:
Hey Alex, if you don't mind swapping your drop axle to a straight axle that would be a great way to gain the additional height over using an over under kit. That would be a lot more expensive than a over under kit part # K71-384-00 so keep that in mind.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 2-3/8 Inch
- Single Axle
- Dexter
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Recommended Axle Flip Kit for a 3,500 lbs Drop Axle
- Q&A: Can 4 inch Drop Axle be Replaced with Straight Axle
- Shop: Dometic Portable Camping Toilet - 5 Gallon Tank - Gray
- Article: How to Raise Your Travel Trailer Height
- Q&A: How To Get Full 2-1/4" Lift With Correct Track Trailer Alignment and Lift Kit For Tandem Axle RR23QX
- Q&A: Adding Lift to 3,500 lb Trailer Axle
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Replacement Leaf Springs for 2019 Riverside Retro 265RB
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Lift Kit Solution to Allow Fifth Wheel Trailer to Sit More Level When Towed
- Article: Trailer Wiring Diagrams
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Which Over-Under Kit Will Fit My Trailer?
- Article: Double-Eye Trailer Suspension System Review
Jameson C.
12/15/2025
Hey Alex, how did things turn out with your axle height change—did you go with the straight axle or the over/under kit? Knowing what worked best could help others deciding between those same options.