Can Sway Control be Used on a Trailer without Using Weight Distribution

Question

Question:

Can i just use a sway control without weight distribution system? thanks

asked by: Bob

0

Expert Reply:

Yes, you can use the Reese Friction Sway control part # 83660 without a weight distribution system.

You would just need to use the tab part # RP26003 on the ball mount as well.

expert reply by: Jameson C

0

Answer 1

Hey Tim, the Brandmotion FullVUE Digital Rear View Mirror with HD Backup Camera #BM86YR that you referenced does come with a camera in the third brake light/CHMSL location that you asked about. I attached a picture that shows the contents of the kit…

view full answer...

Answer 2

Hey Michael, The Brandmotion FullVUE Rear View Mirror #BM86YR is a confirmed fit for your 2025 Ram 3500. I reached out to the manufacturer as well just in case and they confirmed this is a direct fit for your vehicle and will work well! I went ahead…

view full answer...

Answer 3

Hey Jonathan, congrats on the new truck. The 7" drop should be enough, but it is hard to say for sure without knowing what trailer you will be pulling. The 7" drop will get your ball height at 17" or 18" (we measure from the upper…

view full answer...

Answer 4

Hey Andrew, I wish there was a pole tongue adapter solution for your Blue Ox WD system but at this time there isn't and the Equal-i-zer adapter would not work. Would you consider going with a different WD system? That's going to be only way.…

view full answer...

Answer 5

The diagram I have linked for you shows the recommended minimum clearance distances for trucks towing 5th wheel trailers. The diagram includes vertical clearance at the bed rails as well as lateral clearance at the tailgate and bumper. When adjusting…

view full answer...

Answer 6

The 2014 Chevy Suburban does not have a place to plug in a brake controller but it does have a tow package wire bundle that you will use to wire up a brake controller. The wire bundle is located up under the dash to the left of the steering column.…

view full answer...

Answer 7

You are on the right track. The only way we have that will allow you to use the Thule T2 Pro Xtr Bike Platform Rack part #TH69TX with the 2.5" receiver tube opening on your truck would be with adapter. For this, I recommend the Brophy Hitch…

view full answer...

Answer 8

This is a great question. I called my contact at Progress Manufacturing (creator of Equalizer and FastWay Weight Distribution products) to pick his brain on this topic. He explained that weight distribution (WD) and sway control products rely on…

view full answer...

Answer 9

Hey Matthew, out of the three hitches you're going to want the Curt Trailer Hitch Receiver #C22UR. This one sits the highest off the ground at 11" from the ground to the top of the receiver opening. Still not super high up, but not terribly…

view full answer...

Answer 10

A full weight distribution system isn't necessary for pulling a Safari Condo Alto 1713 with your 2015 Subaru Outback Wagon, however I do think you would really benefit from adding a standalone friction sway bar like the excellent Curt #17200.…

view full answer...

Answer 11

The vast majority of trailers on the market use a standard coupler (installed on top of the trailer frame) which is compatible with the B&W Continuum Weight Distribution System w/ Sway Control #BW28FR. Underslung couplers aren't as common but…

view full answer...

Answer 12

To attach a weight distribution hitch to your straight tongue frame you'll first need a pole tongue adapter to get mounting points for the WDH it connect to. Each adapter is brand specific so you'll want to choose the corresponding brand to…

view full answer...

Can Sway Control be Used on a Trailer without Using Weight Distribution

Featured Help Information

Miscellaneous Media

Continue Researching