Replacement Control Knob for Redarc Tow-Pro Liberty Electric Trailer Brake Controller

Question

Question:

Hello, I have a Redarc brake controller in my 2019 Ford Ranger. The knob keeps falling off. Im in search of a new control knob I just need the little knob itself, not the unit that it attaches to. Im wondering it you sell it by chance? Thank you

asked by: Josh

0

Expert Reply:

Sorry Josh we do not. The only way to purchase the knob is with the Replacement Control Knob for Redarc Tow-Pro Liberty Electric Trailer Brake Controller item # RED57FR.

expert reply by: Jerred H

0

Josh

10/23/2024

Okay thanks. I might try a small dab of glue to get it to stay on.

Jerred H.

10/23/2024

@Josh You're welcome!

Answer 1

If your 2019 Toyota Tundra includes the factory trailer wiring for a trailer it will have a connector under the dash for a Trailer Brake Controller #RED72CR. This Controller #RED72CR does come with the connector for this application. The small…

view full answer...

Answer 2

Yes, it is Jimmy! The Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness item #RED72CR includes a plug and play adapter. The connector you're looking for is taped into the harness behind the left side kick panel in your 2020 Toyota Tundra.…

view full answer...

Answer 3

There's only one way to install a 7-way on your 2014 Nissan NV 2500 and it involves installing a 4-way first like with the Curt part #C56148 which is by far the best option that is the most reliable. And then to convert it to a 7-way and install…

view full answer...

Answer 4

Yes, we have the Replacement Control Knob #RED57FR for your Redarc Tow-Pro Liberty Electric Trailer Brake Controller #RED24FR.

view full answer...

Answer 5

Yes it is. The Replacement Control Knob item #RED78FR is the replacement knob for the Redarc Tow-Pro Elite brake controller EBRH-ACCV3 or item #RED44FR.

view full answer...

Answer 6

Redarc does not offer longer cables between the knob and the module but we've spoken with Redarc before and they have told us that you can use a standard RJ45 network cable to extend as far as needed which you'd be able to easily source…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Replacement Control Knob for Redarc Tow-Pro Liberty Electric Trailer Brake Controller

Product Page this Question was Asked From

Continue Researching