Wiring Harness Recommendation For 2025 Honda CR-V Hybrid AWD

Question

Question:

have a 2025 honda Crv hybrid all wheel drive and need wiring kit for trailer not sure whether to go with Curt C56370 or Tekonsha 118741 I am installing myself your recommendation and confirmation of fit

asked by: Kip V

0

Expert Reply:

Hey Kip, thanks for reaching out.

Both of the wiring harnesses you mentioned, the Curt # C56370 and the Tekonsha # 118741 will fit your 2025 Honda CR-V Hybrid AWD. Personally, I would go with the Curt # C56370. I have installed quite a few of these myself and I almost always go with the Curt. I know them to be reliable and their instructions are straightforward and easy to follow. They are usually a bit more affordable than the Tekonsha too.

It is important to note that with the 2025 Honda CRV there is an additional fuse needed to activate the tow package. This fuse in not included with the wiring harness, but you will easily be able to find one at any local auto parts store. The towing section of your owner's manual should tell you the exact fuse type and location. All you will have to do it pop it in.

As far as the wiring harness itself. It will be a very easy DIY install. You just need to pull back a few panels to reveal the OEM connector then you just plug in. The video I linked below will show you how its done. Feel free to reach out if you need anything else.

expert reply by: Jesse M

0

Kip

10/17/2024

Thks you guys are the best!!

Jesse M.

10/17/2024

@Kip Thanks! Glad I could help.

Koop

1/29/2025

@JesseM Hi Jesse, will these harnesses also work with a 2024 CRV hybrid?

Jesse M.

1/30/2025

@Koop Yes! The Curt T-Connector # C56370 will work with all models of the 2024 Honda CR-V and this includes the Hybrid model.

See All (5) Replies to Kip ∨

Jim M.

2/15/2025

The problem I had installing a Curt #56370 in my 2024 CRV EX-L was the 15 amp fuse that was included to fit in the under dash slot 17, was a mini fuse. It needs a low profile mini fuse. Took awhile to catch that.

Jesse M.

2/20/2025

@JimM Interesting, thanks for sharing. I will pass this on to my contact at Curt to see if it is something they need to address.

Uhaul W.

4/16/2025

@JimM same issue here

Answer 1

Hey Rick, sorry about the confusion but the etrailer hitch part #e98848 that you referenced fits both the hybrid and non-hybrid versions of the 2025 Honda CR-V including your Sport model. It is organized in our fitguide in a somewhat confusing way…

view full answer...

Answer 2

Hi Jerry! For your 2026 Honda CR-V Hybrid Sport- L, I recommend the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e98848. This is very similar to the Curt #C13397 you found (which actually will also fit the…

view full answer...

Answer 3

Hello Ed, Yes, both the Curt Trailer Hitch Receiver #C13397 and the etrailer Trailer Hitch Receiver #e98848 fit the 2025 Honda CR-V Hybrid. I completely understand the confusion. Under the "Confirmed to Fit" section, you'll see…

view full answer...

Answer 4

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 5

Yes, it will Terry and congrats on the new SUV. The Curt Trailer Hitch item #C12169 has been confirmed to fit the 2026 Honda CR-V Hybrid Touring Sport. This is a custom fit class II hitch with a 1-1/4" receiver that bolts to your Honda with…

view full answer...

Answer 6

The available trailer hitches for your 2019 Honda CR-V can be pretty easily categorized into hidden and non-hidden groups. I highly recommend going with a hidden-crosstube hitch, especially on a new vehicle like yours, as this is going to create a…

view full answer...

Answer 7

You should be able to change out the backing plates, hubs, and brakes on your trailer so you can upgrade to higher rated assemblies, but I do recommend checking a couple things on your tow vehicle first. It's possible that your weak braking is…

view full answer...

Answer 8

The Draw-Tite Max-Frame Trailer Hitch Receiver part #76128 is indeed a confirmed fit for your 2018 Honda CR-V and is the one I recommend for you because it installs using pre drilled holes in the frame rails. The process to do so is also fairly…

view full answer...

Answer 9

Hey Peter, I think your problem is with the black module box that comes on the Curt T-Connector #C56370. If you take a circuit tester and check the brown wire going into the box it will tell us if it's your CR-V or the box. If the voltage is fine…

view full answer...

Answer 10

The best hitch for a 2024 Honda CR-V is the Curt item #C13397. This hitch is custom fit and bolts to your Honda with included hardware. This hitch fits all models of the 2024 CR-V including the hybrid. The Curt item #C13397 is a class III hitch with…

view full answer...

Answer 11

If you wanted to mount your license plate to the Curt Cargo Carrier part #C18113 you could but we don't have a specific way to do so. You could attach something like the part #LP35BB to it if you'd be willing to modify the carrier. Now that…

view full answer...

Answer 12

First I recommend the etrailer Trailer Hitch Receiver #e98848 for your 2022 Honda CR-V EX. This class III receiver is capable of towing a trailer up tp 3,500lbs with up to 525lbs of tongue weight. When we installed this receiver on a 2021 model year…

view full answer...

Wiring Harness Recommendation For 2025 Honda CR-V Hybrid AWD

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching