Recommended 4-Way Wiring Harness for a 2024 Honda CRV Hybrid Sport L

Updated 05/24/2026 | Published 05/20/2026

Products Featured in This Question

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(760)

$44.90

etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

(1019)

$173.58

Question:

Good evening, I am looking for the 4 pin wiring connector for a 2024 Honda CRV Hybrid Sport L. It is front wheel drive. There seems to be conflicting info as to the correct wiring harness? Do they make a plug and play version of this or are they splice in for this configuration? Thank you for your help!

asked by: Kevin H

Expert Reply:

They sure do Kevin and thanks for the information! For a 2024 Honda CRV Hybrid Sport L, you'll need the Curt T-Connector Vehicle Wiring Harness item # C56370. Curt has addressed the AWD FWD compatibility issues, I confirmed with them just to be sure. This custom fit harness is going to plug directly into a port located behind the left side trim of your rear cargo area. It'll provide you with a 4-way connector capable of controlling your trailer or accessories lighting functions.

I linked an installation video below so you can see where to find the factory port and how to get the item # C56370 set up.

Do you also need a hitch? I saw you were looking at our etrailer item # e98848. This hitch is custom fit for your 2024 Honda CRV Hybrid Sport L and looks great when installed.

expert reply by: Jerred H

e98848
(click to enlarge)

Kevin H.

5/23/2026

Thanks so much for your time and the tremendously helpful answer. I will order from you guys in the morning. I don't need a hitch. I put several of those on in the past on different cars. I have to say the Honda was one of the most challenging ones. I don't know what they put those Muffler brackets on with but even lubricated there tough to manipulate. Pretty tight quarters.

Jerred H.

5/24/2026

@KevinH You're welcome! Happy to help! Yeah those rubber hangers are difficult to get removed sometimes. At least you know your mufflers not going to drop down when you're driving.

Tom G.

5/24/2026

Kevin, I just installed the Curt C56370 Wiring Harness on a 2025 Honda CR-V Hybrid Sport last weekend. At first, I had a difficult time finding the factory installed wiring harness and connector behind the trim panel in the left aft cargo compartment. The connector was installed further back than it appeared in the eTrailer video. The plastic connector was wrapped in brown tape and the open end was pointed down. I was able to find it by feel before actually seeing it. The brown tape needed to be cut to free the connector. Once the tape was cut the connector could be moved and the Curt Wiring Harness could be installed.