Replacement AC Shroud Needed For A 2004 Keystone Cougar

Question

Question:

I need an AC cover for my 2004 keystone cougar RV, what other info will you need?

asked by: Leo S

0

Expert Reply:

Hey Leo,

If you're needing a replacement shroud for the AC unit I'll need to know the brand and model number since there unfortunately isn't a guide to tell us what system your trailer has. You can typically find this sticker somewhere on the unit once you remove the shroud. You can also some times find a sticker listing this as well on the bottom of the unit. To find that one you'll have to remove the cover for the air distribution box to look up and see the bottom of the rooftop unit. Let me know what you find and I'd be happy to find the correct replacement for you.

expert reply by: Kevin C

0

Dometic Data Tag
(click to enlarge)

Leo S.

10/16/2024

Can you pls provide the dimensions of this part number? ADV36FR I cannot locate the AC name or brand so I measured the top and wants to ensure it is the right one

Kevin C.

10/16/2024

@LeoS The Replacement RV Air Conditioner Cover for Advent Air Low Profile Units # ADV36FR is 25" wide x 30-5/8" long x 7-5/8" tall. This is designed for Advent Air's newer low profile units so I doubt it'll be a match with your trailer being 20 years old.

Leo S.

10/21/2024

@KevinC Thanks Kevin You are right. I measured 30” wide, 33” long and 12” high , same exact shape as this one. Any idea what can fit mine given these measurements?

Kevin C.

10/21/2024

@LeoS We don't currently have anything with those same dimensions but you most likely have a Coleman or Dometic AC unit since they're the most commonly installed brands from OEM, especially for the age of your trailer. To find the right fit we're really going to need to determine what you have. Were you able to check for a sticker on the rooftop unit?

See All (8) Replies to Leo S. ∨

Answer 1

Hello Ken. Do you happen to know what brand of air conditioner is on your 1997 Rexall Airbus? The cover in your picture does not look quite like anything we carry and knowing the brand and or model number would really help to narrow it down. The…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 9

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Replacement AC Shroud Needed For A 2004 Keystone Cougar

Product Page this Question was Asked From

Continue Researching