Recommended Drum to Disc Brake Kit for a 3500 lb Tandem Axle Boat Trailer
Updated 10/10/2024 | Published 10/05/2024
Products Featured in This Question
Question:
Looking to update 1 of our boat trailers to disc. Double axle 3500lb. Do you sell a complete kit with everything needed for both axles? I like the looks of the K2HR35DKG Dacromet/KodaGuard kit but would need 2 sets. Would like it to include the bearings, all new lines etc.. and the electric over hydraulic actuator. We are a Yamaha marine dealer resale. Cache Honda Yamaha Hyde Park, Utah Thanks in advance for your time and information. Mark Perkes, GM
asked by: Mark
Expert Reply:
Mark, the Kodiak Disc Brake Kit # K2HR35DKG appears to be what you're looking for but you're going to need to verify which bearings your trailer uses right now to make sure it's compatible.
The bearings, actuator # DX29FR and brake lines # 18TA-BLKIT would need to be added separately as well.
(click to enlarge)
Product Page this Question was Asked From
Dexter DX7.5 Drop-N-Go Brake Actuator - Disc Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Brake Actuator
- Surge Brake Actuator
- Farm Trailer
- Boat Trailer
- Construction Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 7500 lbs GTW
- 2 Inch Ball Coupler
- 3 Inch Channel Tongue
- Disc Brakes
- Electric Lockout
- Dexter
more information >
Continue Researching
- Search Results: rubber grommets
- Search Results: brake line tee
- Search Results: hydraulic brake lines
- Search Results: dexter dx75
- Search Results: rubber grommet
- Search Results: submersible lights trailer lights
- Search Results: trailer wiring
- Shop: Demco Hydraulic Brake Actuator w/ Electric Lockout - Disc - Zinc - 2" Ball - 7,000 lbs
- Shop: Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 7,000 lbs
- Shop: Dexter DX7.5 Drop-N-Go Brake Actuator - Disc Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Shop: InfiniteRule Trailer Latch Lock for Stamped Demco eZ-Latch Trailer Coupler - 2-5/16" Ball
- Shop: Rubber Grommet for 3/4" Round Trailer Lights - Recessed Mount - Open Back
- Shop: Rubber Grommet for 3/4" Round Trailer Lights - Recessed Mount - Open Back
- Shop: Kodiak Hydraulic Brake Hose - 3/16" Male Fittings w/ Stainless Flares - 1/8" ID - 7'
- Q&A: Actuator Replacement Recommendation for Tie Down Model 70
- Video: Feature Breakdown: Replacement Rubber Grommet for Demco Tow Dolly Brake Line
- Video: Let’s Check Out the 3-Light Truck and Trailer Identification Light Bar with White Base
- Shop: Trailer Wiring
- Q&A: Recommended Replacement Actuator for a TDE 7.5K Coupler
- Video: What to Know About the Demco Hydraulic Brake Actuator w/ Electric Lockout
- Video: An In-Depth Look at the Identification Light Bar for Trailers over 80" Wide
- Video: Replacement Mounting Bracket for Kodiak Disc Brake Caliper Spec Review
- Video: Don't Forget the Brake Lines | Tips from the Manufacturer
- Q&A: Wheel and Tire Cover That Fit ST205/75R14 Tires
- Video: Hands-On with the Demco Hydraulic Brake Line Kit for Single Torsion Axle Trailers
- Shop: Suspension Enhancement
- Q&A: What is Distance Between Mounting Holes of Dexter A-60 Coupler
- Q&A: Difference Between Dexter DX7.5L A-60 & A-60XL Disc Brake Actuator
- Q&A: Choosing Between Kenda Karrier and Kenda Loadstar ST175/80-13 Tire
- Q&A: Recommended Hydraulic Brake System for an Escort Boat Trailer
Mark
10/9/2024
My trailer tongue is a welded channel that is part of the trailer. The inner member looks very similar to the DX99FR but it is 3x3 not 3x4. What inner member would fit a 3x3 outer housing? I prefer not to just saddle a new hitch over the existing frame if possible. As stated in the first question I am converting to disc - double axle. Is there a doc that gives the dimensions of the actuators and maybe distance from pin to pin? I hate to order the wrong 1 just to return it. Thanks!