Result: dexter a60

Hi Brian; the reason you aren't seeing an anti-rattle hitch pin for towing is because they're all designed to fit hollow shanks. A ball mount like the #BWTS10035B you were looking at is going to have a solid shank which means the anti-rattle…

The best lock for the etrailer Adjustable 2-Ball Mount item #e66PR is our Hitch Receiver Lock item #e98881. This lock fits both 2" and 2-1/2" receivers. It has the option to be keyed alike as well.

Not all trailer hitches have trailer wiring mounts on them like the Draw Tite part #75940 that you referenced. I would even say that most actually do not. Especially on designs like the #75940 where only the hitch opening hangs below the rear bumper.…

I would be happy to help you. For a Draw-Tite Hitch on your 2016 Audi SQ5 you will want item #75940. This hitch is custom fit and bolts directly to your Audi's frame with included hardware. To add a brake controller you will need two separate…

In most cases, you can just simply add brakes to the existing axle and you don't need an entire new axle. That said, this is all based on the axle capacity and I don't have any way to look this up for you. If you have a 3,500 lb axle for…

The Dexter DX7.5L A-60 Actuator #DX56FR you have is designed to be mounted on the end of the trailer frame as seen in the image below. Based on how your actuator was mounted the Actuator #DX89FR would best install like your current actuator. If you…

If the axle tag on the trailer does not include the axle capacity then you'll have to pull the hubs and either measure the bearings and seals or record their part numbers. The most common bearing combo is a L68149 (1.378" inner diameter) and…

In order to tow a trailer with a 2014 Audi Q5 you'll need a trailer hitch, trailer wiring harness, brake controller (if applicable), and ball mount/hitch ball. The Draw-Tite Max-Frame Trailer Hitch Receiver part #75940 is a great option to start…

While we do have a trailer wiring harness for your 2014 Audi Q5 Premium, I checked with Curt and the part you mentioned is not a fit. Instead, the correct wiring harness for your Audi is the following: - Curt T-Connector Vehicle Wiring Harness with…

Yes we have trailer wiring harnesses that fit your 2014 Audi Q5 like the Curt #C56404 which installs easily by plugging in line with the taillight wiring of the vehicle.

It sounds like you have a classic ground issue with the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer part #C56404 on the 2016 Audi Q5. When the wiring harness does not have a good ground connection it will make the functions act…

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56404 is a confirmed fit for your 2017 Audi Q5 and fits behind both the driver and passenger side rear access panels. I've attached the installation instructions…