What is Distance Between Mounting Holes of Dexter A-60 Coupler
Published 12/13/2023
Products Featured in This Question
Question:
I am adding surge disc brakes on a LoadRite boat trailer with torsion suspension and single 6000lb axle. Would a DX56FR mount on tongue using existing holes spaced 3 inches apart? I also want manual lock out in addition to wired lockout. I would also want shortest actuator possible due to length restrictions in garage. Would standard brake line kit work on this trailer? Axle is bolted to frame.
asked by: Neil M
Helpful Expert Reply:
The distance between the mounting holes of the Dexter coupler part # DX56FR is 3 inches so it would bolt right up to your trailer. For a manual lockout you could use with this you'd want part # DX94FR. Standard brake line kits like the part # DM5424 would work just fine.
(click to enlarge)
Product Page this Question was Asked From
Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K
- Brake Actuator
- Surge Brake Actuator
- Farm Trailer
- Boat Trailer
- Construction Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 7500 lbs GTW
- 2 Inch Ball Coupler
- 3 Inch Channel Tongue
- Disc Brakes
- Electric Lockout
- Dexter
more information >
Continue Researching
- Search Results: brake actuator
- Shop: Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K
- Shop: Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K
- Video: Let’s Check Out the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout
- Shop: Dexter Brake Actuator with Manual Lockout - Bolt On - Drum - 2" Ball - 7,500 lbs
- Q&A: Best Replacement Actuator for a Titan Aero-6000
- Shop: Dexter DX7.5 Drop-N-Go Brake Actuator - Disc Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Search Results: brake bleeder automotive tools
- Shop: Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K
- Shop: Dexter DX7.5L A-60 Brake Actuator - Bolt On - Drum - 2" Ball - Zinc - 7,500 lbs
- Video: Review of Dexter Brake Actuator - DX97UR
- Q&A: Where to Find Surge Brake Actuator Information on Trailer
- Search Results: 2000 lb axle
- Search Results: wheel well
- Search Results: spare tire mount
- Search Results: trailer fenders
- Search Results: axle brake flange
- Q&A: Replacement Inner Member for TDE LP8500 Actuator
- Shop: Dexter Zinc-Plated Brake Actuator - Disc - Multi-Fit Ball - Bolt On - 7,000 lbs
- Video: Dexter DX7.5L A-60 Brake Actuator Review
- Q&A: My Surge Brakes Are Activating When I Back Up My Trailer - What Can I Do?
- Video: Review of Dexter Brake Actuator - Surge Brake Actuator With Electric Lockout - DX49FR
- Q&A: 13 Trailer Fender Replacement with Backing
- Q&A: Complete Electric Brake Installation for 2,000 lb Trailer Axle
- Q&A: Recommended Trailer Fender for 14 Inch Wheels and 28 Inches Long
- Article: Brake Controller Installation: Starting from Scratch
- Shop: Trailer Wiring
- Video: In-Depth Review of the Single Axle Trailer Fender w/ Backing Plate
- Video: Hydraulic Brake Kit Review
- Video: All You Need to Know About the Brake Mounting Flange for 1-3/4" Round Trailer Axles