Will the Replacement Wheel Cup for Yakima HoldUp EVO Fit a Yakima Hold Up?

Question

Question:

Does this fit to the old Yakima Hold up? I wanted a bigger tray for the old yakima Hold up.

asked by: Ian C

0

Yakima HoldUp EVO
(click to enlarge)

Expert Reply:

Thanks for the picture Ian! I checked with Yakima and I am sorry but the Replacement Wheel Cup for Yakima HoldUp EVO Rear Tray item # 8880832 will not fit the old Yakima Hold Up. It only fits the following models of bike racks:

Yakima HoldUp EVO Bike Rack Y02479

Yakima HoldUp EVO Bike Rack for 4 Bikes Y02479-2

2-Bike Add-On for Yakima HoldUp EVO Y02482

expert reply by: Jerred H

0

Jerred H.

1/12/2026

Hey Ian, were you able to find a larger tray that fits your older Yakima HoldUp? Knowing what ended up working could help others with the same rack.

Answer 1

I may have a solution for you, but the #8880832 isn't going to fit into the end on your Yakima HoldUp with a 2" shank; it may look like you could get it into the end but there's not a hole for a pin to be installed even if it did fit, so…

view full answer...

Answer 2

You are correct that the Replacement Wheel Cup for Yakima HoldUp EVO Front Tray #8880831 is for the rear wheel. The front reference is for the front tray as the parts are different between the front and rear trays on the Yakima Hold Up EVO bike…

view full answer...

Answer 3

Another 4 bike rack I would have you consider is the Yakima HoldUp, item #Y02443, along with the Plus 2 Adapter for HoldUp 2 Bike Carrier, 2 inch Hitches, item #Y02446. This rack is a wheel mount style for ease of loading and unloading the bikes and…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 12

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Will the Replacement Wheel Cup for Yakima HoldUp EVO Fit a Yakima Hold Up?

Product Page this Question was Asked From

Continue Researching