Recommended Upgraded Shackle Straps and Wet Bolts for a Triple Axle Weekend Warrior

Question

Question:

I have a triple axle weekend warrior and I need to replace the suspension. I would like to get the wetbolts kit. I measured my shackle links and they are 2 5/8inch from center to center. My question is, do you recommend getting the 2 1/4inch kit or the 3 1/8inch kit? I wasnt sure if going longer or shorter was a better option, or an option at all. I did not see a kit that measured 2 5\8. I am also going to get new leaf springs and the CRE3000 equalizers... not sure if that matters or not.

asked by: Dan

0

Expert Reply:

Hey Dan, unfortunately we do not have a kit that includes 2 5/8" shackle straps with wet bolts. We do however have 2 5/8" shackles # 115052, which you could then use with the Wet Equalizer Bolt # 126B2, and sort of piece together your own kit.

expert reply by: Bryce D

0

Samuel C.

1/12/2026

Hey Dan, how did things go with piecing together the 2 5/8 shackles and wet bolts for your triple axle setup? Your results could really help others trying to match parts for a similar suspension upgrade.

Answer 1

Hello Jason. Generally, we do want the shackle size to be an exact match, but a difference of 3/8" should not be an issue. There is a bit of tolerance when replacing shackles but anything less than 1/2" is considered acceptable. The MORryde…

view full answer...

Answer 2

I recommend going with one of the 2-1/4" shackle kits. You will need either the MORryde Suspension Upgrade Kit for Triple Axle Trailers - 2-1/4" #MR86ZR if you have standard hangers or the MORryde Suspension Upgrade Kit for Triple Axle…

view full answer...

Answer 3

We do have a potential solution for you, but I am sorry to say that we do not offer the MOrryde shackles individually, nor is there a kit made specifically for this setup. Your best bet will be to get the Triple Axle Kit #MR86ZR along with an…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 11

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 12

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

view full answer...

Recommended Upgraded Shackle Straps and Wet Bolts for a Triple Axle Weekend Warrior

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching