RV Roof Vent Patch that Can Work with EPDM

Question

Question:

Looking for some material to patch my RV roof. Question is it EPDM and all you show is TPO or PVC? Can I interchange them?

asked by: Craig R

0

Expert Reply:

Hey Craig, we have the Patch Kit for RV Roof Membranes part # QR74FR which works with the EPDM style membrane that you have so it would work great. It also works with TPO, metal, fiberglass, PVC, vinyl, wood, and most building materials.

expert reply by: Jameson C

0

Answer 1

Hello Mark. Great question. I am all about fixing what you have, however with part of it being delaminated you might want to take a closer look just to make sure that there is not severe water damage underneath. If the roof membrane is still in great…

view full answer...

Answer 2

The Everchill RV Refrigerator w/ Freezer - 10.7 Cu Ft - 12V - Stainless Steel #324-000119 pulls about 8-9 amps on startup / chilling to temperature, and about 2-3 amps while continuously running and maintaining temperature. If you have 2 RV batteries…

view full answer...

Answer 3

Since we don't carry a replacement converter for your 8955AN WFCO our best option would be a new panel that has a smart charger built in like you are looking for with the part #PD4560K18LS8. This is a 60 amp setup like you are wanting as well.

view full answer...

Answer 4

The MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - Smoke #MA00-07500K requires 12V power at 5 amp draw. Since you are installing in a location that doesn't have power wires run, you will need to run a…

view full answer...

Answer 5

The Replacement Wear Plate for Demco 18,000-lb and 21,000-lb Auto-Slide Fifth-Wheel Hitches #DM48KV is 1/4" thick.

view full answer...

Answer 6

Hello Andrew, Well that sounds like quite the fun trip, what state or states will you be traveling through? You're asking a really important question, especially since you're planning a cross-country trip with about 250 pounds of bikes and…

view full answer...

Answer 7

We do have a 90 degree adapter you can use for your 50 amp power cord. I recommend the Camco #CAM55572. This is an 18" long 90 degree adapter that has a twist lock on both ends. With the twist lock ring it will be much more secure and you will…

view full answer...

Answer 8

Hello Paul. The Specialty Recreation Universal Replacement RV Skylight #SR87RR is designed to fit over a standard 14" wide x 22" long cutout. The overall dimensions are 18" wide x 26" long but the inside of the skylight is…

view full answer...

Answer 9

The weight rating on your gas strut #372-5300-20 would normally be printed in LBS or NM somewhere on the strut however since your strut's labels have worn off then your best bet is to measure for a new one. In general, the length to choose for…

view full answer...

Answer 10

Load range D has a capacity of 1,220 lbs at 65 psi, whereas load range E has a capacity of 1,520 lbs at 80 psi. Basically the only difference between the two is the weight capacity. With trailer tires you always want to have them inflated to their…

view full answer...

Answer 11

I would love to be able to give you a replacement follow leg for your landing gear set but sadly it's not going to be that simple. The issue is that Atwood has gone out of business and the products they offered while in business did not always…

view full answer...

RV Roof Vent Patch that Can Work with EPDM

Product Page this Question was Asked From

Continue Researching