What is Minimum and Max Height of Yakima Long Arm Height Extender # Y01150

Question

Question:

Regarding Y01150, Yakima Long Arm Height Extender: I don’t see anywhere it is stated how much additional height it can provide, even on the Yakima website. So I called Yakima and according to them, it can add up to 21.5” and as little as 7.5”.

asked by: William B

0

Expert Reply:

Thanks for passing that on!

expert reply by: Jameson C

0

Jameson C.

1/27/2026

Hey, did the height range you confirmed with Yakima work well for your setup? Knowing how it fit could help others trying to match the LongArm Height Extender to their racks.

Answer 1

The easiest way to carry two 12' kayaks on your 2022 Ford F-150 with the TruXedo Elevate Ladder Rack #TX46NV is with 2 of the Thule Hullavator Pro Kayak Roof Racks #TH898. These allow you to strap the kayak onto the mounting arms at ground level…

view full answer...

Answer 2

The Yakima LongArm, part #Y01149 has a lot of range to it, and can be adjusted to several different positions right out of the box. For use as a roof rack extender, you can add the Extension Kit, part #Y01150 to make the bar much longer, and add…

view full answer...

Answer 3

For your 2008 Ford F-250, I recommend the Draw-Tite Front Mount Trailer Hitch Receiver, part #65049. I've included a video of our installation team putting this hitch onto a 2008 Ford F-250 so you can get familiar with the installation process.…

view full answer...

Answer 4

The #Y01149-1150 is the the #Y01149 paired with the Height Extension for Yakima LongArm #Y01150. The Erickson Big Bed Load Extender #EM07600 you purchased has the highest capacity at 400 lbs.

view full answer...

Answer 5

I have a great rack extender that works perfect for your needs. Unfortunately, while we do not have an extender to make any of our roof load extenders longer, we do have a rack that has the length you need without any additional length needed. That…

view full answer...

Answer 6

Of your options they all are going to get the job done. If you're wanting something that looks the best I would go with the Yakima LongArm Extender #Y01149. If you're not concerned with the looks go with the Malone Axis #MPG907. It has more…

view full answer...

Answer 7

The diameter of the crossbar on the LongArm Truck Bed Load Extender, Item #Y01149 is 2 inches. This is more designed for carrying kayaks like how I attached a picture of and not with a roof rack carrier. For what you are looking for the Rhino-Rack…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

What is Minimum and Max Height of Yakima Long Arm Height Extender # Y01150

Product Page this Question was Asked From

Continue Researching