Are There Issues WIth 4-Way Trailer Harness on 2023 Kia Sportage

Question

Question:

2023 and up Kia Sportage Hybrid trailer wiring harness issues. need to know if any installed and issues. Like fire or communication issues with electrical systems

asked by: Kirk T

0

Expert Reply:

Hello Kirk,

Yes they have been installed and no, there have not been any issues with the 4-way trailer wiring harnesses that fit a 2023 Kia Sportage like the Tekonsha # TK32VR and Curt # C99DR.

expert reply by: Kyle S

0

Robin H.

1/27/2026

Hey Kirk, how did things go with the Curt trailer wiring harness on your Sportage Hybrid? Were you able to get it connected without any electrical issues? Your update could make it easier for others working on the same setup.

Answer 1

The best hitch for your 2024 Kia Sportage is going to be the etrailer Hitch item #e38KR. This hitch is custom fit and bolts to your Kia with included hardware. Both the Curt item #C94WR and the etrailer item #e38KR are confirmed to fit the 2024 Kia…

view full answer...

Answer 2

Hey Greg, generally speaking the Tekonsha trailer wiring harnesses like the part #TK32VR are the most reliable and the better option so that is what I would go with on your 2023 Kia Sportage. This also has the higher amperage rating at 7.5 amps per…

view full answer...

Answer 3

Hi Jerry, For your 2025 Kia Sorento PHEV you would need the Curt Trailer Hitch Receiver #C37RV for the trailer hitch. The right light kit for your Sorento is going to depend on a few factors. For models with the tow package, like you stated you have,…

view full answer...

Answer 4

Hey David, welcome back. To add a 4-way connector to your 2025 Kia Sportage PHEV, you'll want the Curt item #C99DR. It connects directly behind the rear tail lights and there isn't a way to connect it to a tow package. It will not control a…

view full answer...

Answer 5

Hey Cody, congrats on the new SUV. I've got the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector item #C59236 that is universal so it will fit your 2026 Kia Sportage. It has to be spliced into your existing wiring but it will…

view full answer...

Answer 6

Hello Jim, thanks for reaching out. According to Kia, the tow package connections on a 2024 Sorento will be under the driver's side rear bumper cover. We have not been notified of any changes for the 2025 models, but it is too soon to say for…

view full answer...

Answer 7

Hey Aaron, great question! The Trailer Mate Trailer Hitch Receiver #TMT67FR is definitely a budget friendly option for a hitch on your 2026 Highlander. This is basically the economy line from Curt. The welds are a little different (but will still do…

view full answer...

Answer 8

Hey Eric, yes the Curt hitch part #C37RV does fit the PHEV versions of the 2026 Kia Sorento like you have so it would work great. I attached a picture of a review from a customer that installed it on a PHEV for you to check out as well. Are you…

view full answer...

Answer 9

There are a few ways to determine if you have LED lights on your 2023 Kia Telluride. The easiest is to grab a friend or family member and have them apply the brakes while you watch. If you have multiple bright lights that come on immediately that…

view full answer...

Answer 10

Hey Robin, Both the Curt #C99DR and Tekonsha #TK32VR have the same fitments, our team that enters in all of this data to our Fitguide just hasn't gotten to the Curt harness yet. I will say that in terms of quality Tekonsha has been known to be…

view full answer...

Answer 11

In order to install the etrailer Trailer Hitch Receiver part #e98902 on a 2022 Mazda CX-5 you'll need the following: - 3/4" Socket - 19mm Socket - Ratchet - Tape - Flathead Screwdriver - Pliers - Torque Wrench - Pry Bar

view full answer...

Are There Issues WIth 4-Way Trailer Harness on 2023 Kia Sportage

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching