Looking For 7" x 2" Hydraulic Brake Assemblies With Parking Brake
Updated 08/26/2024 | Published 08/20/2024
Products Featured in This Question
Question:
I acquired a Jacobsen 154 sweeper. When I removed the drums to inspect the non-working brakes, I found the wheel cylinder pistons froze up in the bore and all the brake hardware missing. The original brakes were 7” x 2” by the drum measurement. I am needing left and right 7” hydraulic brake drum assemblies with parking brake feature. The Jacobsen part for left hand assembly is 119444 and right hand is 119445. Backing plate info: Mounting studs: 7/16” with 2 13/16” c/c Center hole: 3” Diagonal stud measurements: 4” Thank you in advance for your help. Steve Lillibridge 816-516-9331
asked by: Steve L
(click to enlarge)
(click to enlarge)
(click to enlarge)
(click to enlarge)
(click to enlarge)
(click to enlarge)
Expert Reply:
Hello Steve. The only parking brake ready 7" brake assemblies we offer are the Dexter Electric Trailer Brakes # K23-103-104-00. These are electric brakes and they have 7" x 1-1/4" brake shoes. They use the same 4 bolt pattern for the backing plate as your brakes. We do have some 7" x 1-3/4" Hydraulic brake assemblies part # 23-398-399, but nothing that is parking brake ready.
Product Page this Question was Asked From
Dexter Hydraulic Trailer Brakes - Uni-Servo - 7" - Left/Right - 2.5K
- Trailer Brakes
- Hydraulic Drum Brakes
- Standard Grade
- Manual Adjust
- Single Servo
- 7 x 1-3/4 Inch Drum
- 2500 lbs Axle
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Parts Needed To Add Electric Drum Brakes To 1994 Jayco Pop-Up
- Q&A: Lift Kit that Fits Trailer with Dexter Torflex 2,400 lb Axle
- Search Results: surge brakes
- Search Results: surge brake actuator brake actuator
- Search Results: weight distribution hitch
- Shop: Dexter Hydraulic Trailer Brakes - Uni-Servo - 7" - Left/Right - 2.5K
- Q&A: Replacement Hydraulic Brakes for Pop-Up Camper
- Shop: Brake Controller
- Shop: Torflex Lift Kit - Single Axle - 2-5/8" Lift
- Shop: Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Shop: Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44643 - Pre-Greased
- Shop: Dexter Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs to 2,200 lbs
- Shop: Dexter Trailer Hub and Drum Assembly for 2,200-lb Axles - 7" Diameter - 4 on 4
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Correct Replacement for Atwood 7" x 1-3/4" Hydraulic Drum Brakes
- Q&A: Uni-Servo Hydraulic Trailer Brakes For 7 Inch Drums
- Q&A: Replacement Wheel Cylinder for Dexter Brake Assembly 023-341-00
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Recommended Hydraulic Brake Hubs that Work w/ 10" Wheels
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Most Popular Wheel Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Trailer Wiring Diagrams
Steve L.
8/24/2024
Jesse, Thank you for your response. I will not be able to use the Dexter Electric Trailer Brakes # K23-103-104-00. There is not a machined surface for the magnet inside the drum. In your email, you stated that the electric trailer brake use the same 4 bolt pattern for the backing plate as my brakes. Did the same 4 bolt configuration hold true for the Hydraulic brake assemblies part # 23-398-399? Backing plate info: Mounting studs: 7/16” with 2 13/16” c/c, Center hole: 3” Diagonal stud measurements: 4” Thank you. Steve