Is the Optronics 7-Pole Blade to 5-Pin Delphi Connector Available W/ Out Backup Camera Plug

Question

Question:

I need this cable without the back up camera option. I am sure this will work on my 2019 Malibu trailer as the Delphi connector is the same. Do you sell the cable w/o the camera option? Thank you.

asked by: Bill R

0

OPT42ER
(click to enlarge)

Expert Reply:

Bill, it looks like the 7-Pole Blade to 5-Pin Delphi Connector # OPT42ER is only available with the backup camera option.

expert reply by: Bryce D

0

Answer 1

The 7-Pole Blade to 5-Pin Delphi Connector Wired Trailer Adapter with 2-Pin Backup Camera Plug - Coiled #OPT42ER measures 94-1/2" when it is stretched out.

view full answer...

Answer 2

Sounds like you are looking for the #A7WCB which matches the part number and description you mentioned. This is a replacement trailer side 7-way plug.

view full answer...

Answer 3

Yes, the Custom Third Brake Light Camera for Factory Monitor part #3460015 which is a fit for a 2018 Ram 3500 will still allow you to use your factory backup camera in the tailgate. That said, you could not display both cameras at the same time so…

view full answer...

Answer 4

The duty cycle on the Firestone Heavy Duty Air Compressor part #F9499 is 30%. The flow rate of this compressor is 0-30 psi in 14 seconds and 0-60 psi in 35 seconds while using a 1/2 gallon tank. The duty cycle on the Firestone Xtreme-Duty Air…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 7

Hey Paul, thanks for reaching out! We have some 4-Way options that plug into the factory wiring on your 1996 Ford F-350, but in order to install a 7-Way you'll need to use the 7-Way Pre-Wired Car Connector #20023 and hardwire it into your factory…

view full answer...

Answer 8

I reached out to Camco about the Power Grip RV Power Maximizer - 50 Amp Female to 15 Amp Male and 30 Amp Male item #CAM55025 and received this information from one of their reps. All Grounds, “G”, and all Neutrals, “W”, are connected and they should…

view full answer...

Answer 9

Hi Roman, The strain relief at the connector of the #OPT42ER is approximately 3-1/4" in length and would require a 3/4" hole to pass through. If you have any other questions please feel free to comment below.

view full answer...

Answer 10

To install the Optronics LED Trailer Lights, part #STL22RB, you will need to use the Straight 3-Wire Pigtail, part #A45PB. The Red wire of #A45PB will carry the turn signal function, the Black wire is for running lights, and White is ground. If you…

view full answer...

Is the Optronics 7-Pole Blade to 5-Pin Delphi Connector Available W/ Out Backup Camera Plug

Product Page this Question was Asked From

Continue Researching