Replacement Hub for 2008 EZ Loader Boat Trailer
Updated 01/19/2026 | Published 08/06/2024 >
Products Featured in This Question
Question:
My dad has a 2008 ez loader trailer and needs a new hub. Do you have hubs for this trailer?
asked by: Jonathan
Expert Reply:
Hi Jonathan; I'm sure we have a replacement hub for your dad's 2008 EZ Loader boat trailer. However, you will need to identify the axle or the bearing combination to know what fits. Try checking the axle tag to see if it is listed. If not, you will need to pull the hub and check for part numbers on the old bearings or measure the inner diameter of the bearings if no part numbers are listed. This is a precise measurement so it should be done with digital calipers like # PTW80157. You will also need to identify the bolt pattern.
The majority of the EZ Loader trailers we are asked about have a standard 3,500 lb axle with a 5 on 4-1/2 bolt pattern using # L68149 inner and # L44649 outer bearings. If you find this to be true for your trailer then you can use the # AKIHUB-545-35-EZ-K as a replacement. If you would rather have one that is galvanized since it is a boat trailer we also have the # CE13515.
If you find that it has a different axle/bearing combination you can let me know in the comments below and I will see what else is available for a replacement.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5-1/2 - Pre-Greased
- Video: Feature Breakdown: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles
- Q&A: How To Tell If I Have An EZ Lube Axle
- Q&A: Replacement Hub for a Shorelandr Boat Trailer LUV2314LW-03
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: trailer wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Shop: Suspension Enhancement
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
- Search Results: trailer jack
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Shop: Brake Controller
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Article: How to Measure for Trailer Hitch Drop



Robin H.
1/19/2026
Hey Jonathan, were you able to check the axle tag or measure the bearings on your dad’s EZ Loader trailer? Knowing that would confirm if one of those 3,500 lb hubs fit. Your update could make it easier for others working on similar trailers.