Availability Of Backup Camera Monitor To Replace Triple Vision Model STM-703C

Question

Question:

Do you offer a back up camera monitor that will replace a Triple Vision model STM-703C monitor?

asked by: Bernard C

0

Expert Reply:

Hello Bernard. We do offer backup camera systems and monitors, but unfortunately, we do not have anything that will replace your Triple Vision model STM-703C monitor. This is not a brand we carry, so none of our monitors will be compatible.

The only solution I can offer is a whole new camera system with its own new monitor. For that I recommend the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen # FOS05TASF.

expert reply by: Jesse M

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 7

Hello Andy! Yes, I would be happy to put together a flat tow package for your 2019 GMC Canyon. Here is what I recommend: - Roadmaster Direct-Connect Base Plate Kit - Removable Arms #RM-523182-5 - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights…

view full answer...

Answer 8

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 9

No, they will not Mark. The Replacement Legs item #RP63FR only work with the Reese M5 hitches like the item #RP30928 for example. The only way to mount the Reese 5th Wheel Trailer Hitch item #RP30047 in the puck system of a 2025 Silverado is to use…

view full answer...

Answer 10

Hi Cody; the #LC328484 is a Trailair Flex Air with a Lippert 0719 bolt pattern. Assuming that is what you have, the correct Sidewinder is the Reese Sidewinder 5th Wheel King Pin with Rotating Turret #RP34FR. What 2022 Ram model do you have? Do you…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Availability Of Backup Camera Monitor To Replace Triple Vision Model STM-703C

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching