What Outer Tube Diameter Does the Lippert Replacement Roller Tube Endcap Fit

Question

Question:

What size tube does part LC423751 fit?

asked by: Andy C

0

Expert Reply:

Hey Andy, thanks for reaching out!

The Replacement Roller Tube Endcap # LC423751 is designed for the Solera tubes which have a 3-1/2" outer diameter.

expert reply by: Jon G

0

Jerred H.

1/19/2026

Hey Andy, did the endcap fit your Solera tube with the 3-1/2 inch outer diameter? Knowing how it worked could help others checking their awning parts.

Answer 1

I may have a solution for you, but without knowing exactly what type of awning this is I cannot confirm this will work. However, we do carry 2 awning end caps for Lippert/Solera awnings that I recommend checking out and seeing if they're the same…

view full answer...

Answer 2

If the diameter of your Carefree awning endcap is 3-5/8 inches the Solera endcap part #LC423751 that you referenced would work as that's its diameter. This is a pretty standard size so I could see it working but you'd want to verify for…

view full answer...

Answer 3

Hey Jim, we sell the replacement screws to use with the replacement cap part #LC423751 as the part #LC266156 but based on the price of them it might make more sense to get them locally. These are: Screw type: #6 Screw diameter: 1/8" Screw…

view full answer...

Answer 4

Hi Brad; the only awning endcaps we carry are the #LC423751 and #LC423750 which are designed for Lippert Solera electric awnings. If you have this awning on your SportTrek 251VFK either of these will work as a replacement. However, based on what I…

view full answer...

Answer 5

The diameter of the Replacement End Cap #LC423751 is 3 5/8".

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

What Outer Tube Diameter Does the Lippert Replacement Roller Tube Endcap Fit

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching