Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the double ball joint underneath your single, double, or triple electric Lippert Coach Step or Stromberg Carlson sliding step. Ball joint connects the gear plate to the rotating arm.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're gonna be taking a look at the Lippert Replacement Double Ball Joint for Lippert Electric Coach Steps.Now, this does have all the hardware you need to replace that crucial part on your step. It's just gonna leave the double ball joint underneath your single, double, or triple electric Lippert Coach Step, or Stromberg Carlson Sliding Step.This connects the gear plate to the rotating arm. So, as you can see, we've got this threaded bolt in between the two links there. And that's going to allow you to adjust that to the length that you need. At its most compact, I'll give you a measurement of how long that is.It also comes with the two bolts to go on either side of those rotating ball joints.So, at its smallest, from end to end, it's about 4 1/2". And if we thread it out, about as long as it will go, I'll give you another measurement there.So, this is a ...
Whenever you get this, it is gonna be separate. You will have these two pieces here. They do have a little bit of grease on there to make them easier to move around that socket. And then this threaded bolt is in between. So, that one's all the way out.
Let's take this one as far out as it will go.Now, the two bolts it comes with are gonna be a little different from each other. As you can see, one has a shorter shoulder than the other. So, just note that whenever you're replacing your component, to note which one goes where, so that you don't have the wrong threading.All right. So, those are out about as far as it will go. And now, the whole thing is gonna be about 6 1/2".
So, that just gives you an idea about how much space you have there to adjust.Again, we have those two bolts. One is going to be about 2" long. The other, about 1 1/2. And again, those are the same thread, pitch, and size. It's just that one has that slightly longer shoulder on it.So, that's gonna do it for our look at the Lippert Replacement Double Ball Joint for Lippert Electric Coach Steps..
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Jim S.
1/29/2019
Still perfect.
Steve
12/10/2024
Product is still working fine after a year with heavy usage
Dale
3/29/2024
no problems with the step operation. works really well.
Oswaldo
8/8/2019
Still holding up after a year of full timeing
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Shane P.
3/4/2022
Perfect