Recommended Trailer Hitch for a 2010 Hyundai Elantra Touring

Question

Question:

Hi, would a Drawtite 24990 fit on a 2010 Elantra touring? Thank you kindly

asked by: Kayla

0

Expert Reply:

Kayla, it looks like the Draw-Tite 24990 was a fit for the 2019 - 2024 Kia Forte, but has since been discontinued. For your 2010 Hyundai Elantra Touring, you can use the Draw-Tite Sportframe Trailer Hitch Receiver # 24844 instead.

This hitch is identical to the 24990 hitch with the same weight capacities and the same class I receiver, but will work with your vehicle.

expert reply by: Bryce D

0

Kayla

8/1/2024

Hi Bryce Thank you so much for your reply, it’s very appreciated . If the 24990 is the exact same as the 24844 , could I still use it? My husbands friend has a new one that he said we could have . Have a wonderful day .

Bryce D.

8/1/2024

@Kayla The 24990 is not exactly the same, just very close. The frame brackets are different and bolt holes would not line up.

Kayla

8/1/2024

@BryceD Darn, a free hitch was sounding good ?? but not meant to be . Thank you for your time .

Bryce D.

8/1/2024

@Kayla I know, I wish I had better news! You're welcome.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

Hey George, for your 2026 Toyota RAV4 Hybrid we have the Curt hitch part #C34FR62ZY as a confirmed fit but it's on a little bit of a backorder at the moment which is why you don't see any hitch options in our fitguide. The hitches from…

view full answer...

Recommended Trailer Hitch for a 2010 Hyundai Elantra Touring

Continue Researching