bing tracking image
Q & A Icon

Replacement Bearings And Seals For A 2019 Jayco North Point 387RDFS  

Updated 02/17/2026 | Published 06/28/2024

Question:

Hi Folks I have a 2019 Jayco North Point 387RDFS, Can you tell me if the eTrailer Item BK3-200 is the correct wheel bearing kit for my unit? In the photos on your website, it shows a cotter pin for Item BK3-200. The castle nut retainer on my unit is a part that fits over the nut locking it from turning. Thanks very much. Dave

0

Expert Reply:

Hey Dave,

There unfortunately isn't a way for us to look up the bearings and grease seals by using the model number or VIN for the trailer, we would instead need to see the axle tag sticker on the axle tube to be able to look up the parts.

You can also remove the hub and take your bearings and grease seal out and see if the part numbers are still stamped into them or you can measure points B, C, and D from the diagram with a caliper # PTW80157 for the inner diameters and the hub bore hole for the outer diameter. With these measurements I can pick out the correct replacements. For the nut retainer you can use part # 6-190.

expert reply by:
0
Kevin C
Spindle Measurement Diagram
Spindle Measurement Diagram
(click to enlarge)
Brooke M. profile picture
Etrailer Expert

Brooke M.

2/17/2026

Hey Dave, were you able to check the axle tag or measure your bearings and seal to confirm the right kit for your Jayco? Knowing what you found could help others trying to match their wheel bearings too.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>