Are There Front Camper TIe-Downs For 2024 Ford F-250

Question

Question:

Do you sell front camper tie downs for a 2024 F-250

asked by: James V

0

Expert Reply:

Hello James,

Yes, we do have front camper tie-downs for your 2024 Ford F-250, though the right set is going to depend on your bed size and hitch.

For a 6-3/4' bed with the Ford factory hitch, non-TorkLift aftermarket hitch, or TorkLift SuperHitch Magnum hitch, you'll need the TorkLift Camper Tie-Downs - Custom Frame Mount - Front # TL77CR.

For an 8' bed with the Ford factory hitch, non-TorkLift aftermarket hitch, or TorkLift SuperHitch Magnum hitch, you'll need the TorkLift Camper Tie-Downs - Custom Frame Mount - Front # TL87CR.

expert reply by: Kyle S

0

Jenny N.

2/17/2026

Hey James, did the TorkLift front camper tie-downs fit your F-250 the way you needed? Knowing how they worked could help others choosing between the 6-3/4' and 8' bed options. Your update could make it easier for the next person with the same truck.

Answer 1

I have a way for you to get 4 of the bright white TorkLift Locking Fastgun Turnbuckles in bright white, but there is not a 4 pack. You'll just need to purchase (2) of the #TLS9530 which gives you the 4 total Turnbuckles you need to secure your…

view full answer...

Answer 2

I contacted the Rep at Happijac to inquire on your question of the HappiJac Swing-Out Extender Bracket for Dual Wheel Chassis Truck Camper Jacks, #HJ54FR. His response was that yes, you can "stack" the extensions. There is however a point…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Are There Front Camper TIe-Downs For 2024 Ford F-250

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching