Hard-Folding Tonneau Cover For 2024 GMC 1500 AT4 With 5' 8" Short Bed

Question

Question:

hi im looking for hard folding tonneau cover for my 2024 gmc 1500 at4 with a 5ft 8inch bed please and thank you

asked by: Mel S

0

Expert Reply:

Hi Mel,

We can definitely get your 2024 GMC Sierra 1500 AT4 with the 5'8" bed set up with a hard folding tonneau cover and by far my favorite for this is the BAKFlip MX4. I really like this cover because it is totally inside your bed rails and flush with them, which allows your truck to keep a streamlined appearance.

Its panels are 1/2" thick and made of aluminum so they are light but really strong, capable of handling 400 lbs of distributed weight. The only thing to note is the right fit for your truck will depend on if you have the CarbonPro bed or not:

- WITH CarbonPro Bed: BAKFlip MX4 Hard Tonneau Cover # BAK52FR

- WITHOUT CarbonPro Bed: BAKFlip MX4 Hard Tonneau Cover # BAK448130

expert reply by: Kyle S

0

Answer 1

Hi JD; if I had to choose between the Leer Hard Tonneau Cover #LE67FR and BAKFlip MX4 #BAK448133 I would go with the MX4. As far as security goes both are locking covers so it will be about the same between the two. The MX4 has seals and drain tubes…

view full answer...

Answer 2

I called BAK industries to see if they had weight specifications for their tonneau covers. Unfortunately, they do not record these, but there is something that I can offer that might help. The BAKFlip F1, part #BAK72329, and the MX4, part #BAK48329,…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 5

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 6

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 7

Hey Matt, Furrion typically has 4 wires running to their thermostats and the Chill Cube Thermostat #LC74DX is no exception. The harness you see with the thermostat would plug into the Chill Cube's controller and has 4 wires to extra wire to to…

view full answer...

Answer 8

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 9

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 10

Hi Bruce! The Access Toolbox Edition Soft, Roll-Up Tonneau Cover #A63FR will indeed fit your 2021 GMC Serra 1500 SLT with the short bed and your toolbox. This can be used with toolboxes that measure 19" to 21" long, so you are good to go!…

view full answer...

Answer 11

Hey Paul, congratulations on the new truck and motorhome! I can definitely help you out here. In addition to the tow bar and brake system you will need the base plate kit and your tow bar wiring. For a complete setup I recommend the following: -Demco…

view full answer...

Answer 12

Hey Eric. Axle spacing isn't the best way to determine what replacement equalizers you need. The most accurate way to find a replacement is to match up a replacing equalizer as close as possible to the dimensions of the one currently on your…

view full answer...

Hard-Folding Tonneau Cover For 2024 GMC 1500 AT4 With 5' 8" Short Bed

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching