Product Experts Available Now!
Call 1-800-940-8924
BAK Revolver X4s Hard Tonneau Cover - Roll Up - Aluminum and Vinyl - Matte Black
(82 reviews)
Price: $1,399.99
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
BAK Revolver X4s Hard Tonneau Cover - Roll Up - Aluminum and Vinyl - Matte Black
Part Number: BAK62VR
In Stock
$1,399.99
Retail:$1,415.20
You Save: $15.21
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (82)
- Q & A (0)
- Photos
BAK Industries Tonneau Cover - BAK62VR
Highlights
- Custom Fit for Your Vehicle: Secures to your truck bed with model-specific clamps and hardware
- Hard Cover Keeps Everything Out: Locks with tailgate so gear stays safe and dry.
- Full Bed Use: Rolls up tight for hauling large items without removing the cover.
- Strong Hybrid Build: Aluminum slats under matte vinyl hold up to 400 lbs evenly.
- Low-Profile Look: Flush, matte-black design keeps a clean, factory-style appearance.
- 10 Minute Install: Clamps on inside bed rails—no drilling or special tools needed.
Features to know about
Secure Cargo in Any Weather: Aluminum and Vinyl Hybrid Construction
The Revolver X4s keeps gear safe and dry thanks to its tough aluminum and vinyl build. The 1/4" thick, aircraft-grade aluminum slats give it strength while the double-coated matte black vinyl top resists tears, impacts, and UV damage. It supports up to 400 lbs of evenly distributed weight when rolled out, so it’s built for real use. With weather seals and beveled edges directing water off the sides, your bed stays protected without the need for drain tubes.
Full Bed Use Without Removal: Roll-Up Design
Loading large items is simple. The cover rolls up by hand using built-in nylon straps and buckles that secure it neatly behind the cab. It mounts inside the bed rails so you still have access to stake pockets for tie-downs or racks. Whether you’re hauling plywood or camping gear, you’ll have full bed access in seconds without needing to take the cover off.
Everyday Convenience: One-Person Operation
Opening or closing this cover takes just one person. Pull either of the two release cords to unlatch it, roll it forward, and secure it with the straps. To close it, roll it back out and press down on the rear slat—built-in side latches automatically lock as the tailgate shuts. There’s no Velcro or snaps to fuss with, and when the tailgate is locked, so is your cover.
Sleek Look That Lasts: Low-Profile Matte Black Finish
Unlike bulky covers that sit high above the rails, this one sits about 1-1/2" above for a clean, flush look. The matte black finish on both the vinyl top and aluminum underbody blends smoothly with the truck’s lines while resisting fading and wear over time. Rubber and felt liners protect both the finish and your hands when temperatures swing from hot to cold.
Quick Installation: Clamp-On, No Drilling Required
Getting it installed doesn’t require drilling or complicated tools—just a wrench. The self-aligning clamp system keeps everything square on the first try, thanks to slotted brackets, pre-installed shims, and spacers. Once tightened, the rails stay snug for a solid fit that’s ready for everyday use.
Specs
Weight and Capacity
- Weight capacity: 400 lbs evenly distributed
Warranty
- Limited warranty: 5-year
80130 BAK Revolver X4s Hard Tonneau Cover - Roll Up - Aluminum and Vinyl - Matte Black
This Product Fits The Following Vehicles
- 2019 - 2026 GMC Sierra 1500 5-3/4 Foot Bed
- 2022 - 2022 GMC Sierra 1500 Limited 5-3/4 Foot Bed
- 2019 - 2026 Chevrolet Silverado 1500 5-3/4 Foot Bed
- 2022 - 2022 Chevrolet Silverado 1500 LTD 5-3/4 Foot Bed
Ratings & Reviews
4.5
82 reviews
by:
Jerry
09/19/2024
2024
Chevrolet
Silverado 1500
I had these mirrors (same brand but different model) for my 2016 Silverado and used them for the past 8 years when towing our camper. They installed easily and quickly and were also easy to remove until I needed them again. Since getting a new Silverado I opted for these type of mirrors again. I test fit these new ones and again they go on and off easily. I anticipate them holding up as well as my old ones
by:
Nick
01/03/2025
I like its slim profile look and solid top. I highly recommend this cover with the following exception. In cold weather, the top can freeze in its tracks after a car wash or rain. It is then almost impossible to roll up without putting a heater in the bed. This is the only reason I give it 4 stars. I still would buy it again since I don’t roll up the top much in the winter.
by:
Wade
04/19/2023
Honest 1-year review. I like the cover but have issues with it. First, let me state the cover is very nice and does a great job as a cover. But if you have motorcycles like I do the cover presents a challenge when trying to haul them in the back of my truck. There is no easy way to take it off and it's a real pain in the butt. I've found one of my bikes has a fender and doesn't fit under the cover and will rub it if I try. The only solution is to remove the cover and it's proven to be a pain in the butt. So more often than not I do not use the truck with this cover on it to haul my motorcycles. I also don't like how the rubber edge strips just project a few extra inches past the front of the cover. Another thing is the cover is unusable if there is ice on it. You can't roll it up unless you melt all the ice so if you needed it in a pinch and store your truck outside like me you'll find removing the cover with ice on it to be a nightmare. But other than that the cover has been very good. I'd give it a 4 star rating for everyday use but when it comes to hauling motorcycles or winter use I'd give it a 3 for not having a quick-release feature and making it difficult to remove.
by:
Michael
02/26/2025
Michael
2/27/2026
Still working great. Actually removed it from my 2020 Silverado TB to a 2024 Silverado LTZ, no problem.
by:
Jason S
07/15/2025
2025
GMC
Sierra 2500
Very happy with both the product and the customer service. Originally I was given a ship date and that date changed after the order was placed. I emailed with Lauren and she was great! It was delivered one day ahead of the original time. This is my second BAK Revolver cover. I had the first on my truck for eight years until I sold the truck. The cover is secure, almost watertight, and looks amazing.
Brooke M.
7/25/2025
Lauren is great! So glad she was able to help you with this. The cover looks right at home on your new truck! Thanks for sharing the pics :)
by:
Don
08/12/2025
I am happy to report that after a year of use since I installed it, my Revolver cover is still solid, and in perfect condition. Only once did I have a little trouble opening it due to the locking rails icing up during an extremely cold day. I was able to free it up with minimal effort within a few minutes, and without causing it (or me) any damage.
The cover looks great, keeps the bed dry, and I’ve received many compliments. Also, even with my full 8’ bed, it doesn’t restrict my view through the rear window when rolled up.
The cover looks great, keeps the bed dry, and I’ve received many compliments. Also, even with my full 8’ bed, it doesn’t restrict my view through the rear window when rolled up.
by:
Todd
02/19/2026
Beat cover I have had so far.
Lazer S.
2/24/2026
Glad to hear you are still happy with it, Todd! These hard roll up covers are definitely nice and durable. What are you keeping in your bed? I have a bunch of survival type gear in a milk crate. Can never be too prepared!
by:
Beth Ann
08/12/2026
Looks great!
Works great, and our camping generators fit under it!
Works great, and our camping generators fit under it!
by:
Brian P.
06/13/2022
2020
Ford
F-250 Super Duty
The original cover was improperly sized from the factory (direct shipment from BAK due to backorder). etrailer, as usual, went above and beyond to get me the correct fitting cover. The new cover fits perfectly and looks great on my truck. Hopefully it will last, though I worry about the quality considering BAK did not notice they sent me a cover with the wrong dimensions originally. Giving 4 stars due to poor QA from the factory on the original shipment.
Brian P.
6/14/2023
The cover has been on my truck for a little over a year now. It looks exactly as it did the day I installed it. By far the best tonneau cover I have ever put on one of my trucks. Also, the roll up is much more convenient than the older tri-fold models I have had before. This thing looks good and is tough as nails. It has not been babied over the last year, but shows no signs of weartear. My one year review is 5 STARS!! I highly recommend this cover!
by:
Tim
08/23/2022
This is my second BAK cover. I had the flip before this one. I definitely prefer this roll up style as it is much easier to open/close and not nearly as heavy. It would be 5 stars except for the fact that I have to constantly re-adjust and pull the cover back towards the tail gate. It seems to slide forward a micro amount with each opening. So after a few weeks of opening and closing there is a small gap between the tailgate and cover so I have to move it back to seal the gap. Otherwise love this cover.
Tim
8/24/2023
My previous review still stands. I have to reposition cover at least once a month. Still love the cover other than that issue. I believe a redesign of the connector would be in order for this product to get 5 stars.
Tim
9/7/2025
Not great anymore… the glued on waterproof liner started peeling up about 1 year into service, the the pivot points on the tool up part started to separate towards the back and now it doesn’t roll back flat or seal properly.
Kate F.
9/9/2025
@Tim Well that's not good Tim! I see that this cover has a Limited 5-year warranty, BAK prefers to handle their warranties themselves, I suggest reaching out to them. [email protected] Please let me know how things work out.
by:
Roger
09/20/2022
2021
Ram
3500
Mostly a great cover. I've had this cover on my 2021 Ram 8' bed for 1 year. Install took about 45 minutes. There are 2 issues. After snow or rain and temperatures drop below freezing the cover's locking system along the rails freezes making it very difficult to open or close. You have to go the rails and pull the mechanism free. This year I will try WD 40 prior to the winter season to displace moisture.
2nd, issue two of the hinged supports in the cover separated after being rolled up during a several day trip. One about 3 months ago the second 2 weeks ago.The first one was mostly cosmetic. The second separation would not allow the cover to close without forcing it. I contacted BAK and they quickly opened a warranty claim. After sending them photos and a description of the problem they sent a replacement cover. The 5 year warranty is a pluse. Hopefully this is a one off issue. If I have the issue again I will ask for a different cover.
2nd, issue two of the hinged supports in the cover separated after being rolled up during a several day trip. One about 3 months ago the second 2 weeks ago.The first one was mostly cosmetic. The second separation would not allow the cover to close without forcing it. I contacted BAK and they quickly opened a warranty claim. After sending them photos and a description of the problem they sent a replacement cover. The 5 year warranty is a pluse. Hopefully this is a one off issue. If I have the issue again I will ask for a different cover.
Roger
9/21/2023
I had a second warranty claim in June 2023 due to the same issues. I contacted BAK warranty claims and once again they were quick to respond. I asked them to replace my cover with a BAKFLIP MX4. They agreed and shipped the replacement very quickly. So far the new cover is working fine. Im interested to see how it works in cold and freezing conditions. My personal belief is the BAK Revolver is too heavy when rolled up against the cab on an 8 foot bed. The weight causes it to flex, stressing the hinged ribs. The ribs then start to separate. Im guessing a cover for a shorter bed would not cause the ribs to separate due to less weight when rolled up.
by:
John
05/12/2026
It works great. However, it was a bit harder than advertised to install.
by:
Not holding up for even one summer
09/06/2024
Purchased this in February. By August this product was already failing. As a roll up tonneau you would expect it to not fail where the cover sits when rolled up but that is exactly what is happening. Photos speak for themselves. I do not recommend you purchase this.
Will be reaching out to customer service today. Will see how how well they support their product.
Will be reaching out to customer service today. Will see how how well they support their product.
by:
Tim D.
07/09/2024
Customer service from E-Trailer was exceptional as usual big shout out to Cammi F. Thank you for keeping me updated as this was actually delivered from manufacturer.
by:
Bryan
06/17/2026
Love this cover and after a year no fade and still looks brand new.
by:
Debbie
06/18/2026
Well made, easy install.
by:
JR
01/04/2026
I've had it for about a year now. Good quality and provides excellent security to your cargo bed. Freezing temperatures can make it difficult or impossible to roll up, especially after being exposed to wet conditions-then freezing. I've had to go through the heated car wash a couple times in order to thaw it out to roll it up. However, I would definitely still buy again.
by:
Christine
01/31/2023
would have given it a 5 star rating ... BUT ...on a VERY windy day in Kansas ... somehow the cover bowed enough to slip out of the latch rail ...very strong side-wind & it was seen floating up & down in my rear view mirror ...I quickly pulled over to secure it! The small rear corner plastic seal was lost and the other later became so warped in the summer heat it was unusable - after an extended period of being in rolled /stowed position! So now I get a wet rear bed liner when I drive through rain & the carwash ... but as my one initial experience with the customer service was not great I have not followed up on trying to get replacement parts! I use black gorilla tape to seal the rear corners! Othe than that -I really like the security for my truck bed contents, the ease of use ease of install and I just double check the latch (& rail alignment) by thumping it upwards each side before closing tailgate ...no more issues with side-winds!
Katrina B.
2/7/2023
Holy wind strength! Luckily this has a 5 year warranty. I will send you more detailed information about contacting BAK in an email.
Katrina B.
2/23/2023
Holy wind strength! Luckily this has a 5 year warranty. I will send you more detailed information about contacting BAK in an email.
by:
Brett
06/12/2025
I wanted to like it a lot, but it definitely came with some problems. Ive had it installed for about a year and it has been nice to secure my stuff and still have the option of a completely open bed. Unfortunately it required some tweaking and a bed length shim to fit my truck, which was supposed to be custom fit. I also had to recrimp the release cable once, and the rails frequently ice up in the winter, making it hard to open.
by:
Adam
06/30/2025
Great cover! Easy to install by yourself with no help. I've had this cover for over a year. It has held up great with no sun fade, is extremely durable and has a great seal to keep the weather out of the truck bed. 100% recommend!
by:
Steven
01/17/2023
2021
Ford
F-350 Super Duty
The tonneau cover fits as advertised no leaks it has been a great addition to my truck I really like the way I have my whole bed to use and still have the security of a hard cover without blocking my view out of the rearview mirror for hoking up my fifth wheel trailer.
Steven
1/18/2024
The Tonneau Cover has been working Great no leaks. I really think this product works as advertised. I would and have recommended this product to other people.
by:
Timothy
08/25/2022
I’ve had this for a year now. The good: Very nice product, I recommend it. The rollaway ease is great - quick, easy, compact and reliable during near every day use. Effective watertight (not water proof) seal. Definitely recommend the rugged vinyl of the X4 over the X2.
The not so good: the ribs can get kinked and are hard to work back into position when they do. This was really only an issue during initial install, so just be cautious to avoid letting it bend the wrong way. The plastic end caps on the lock rail can pop off, so I recommend using adhesive to hold them firmly in place.
Overall it’s great. Definitely recommend.
The not so good: the ribs can get kinked and are hard to work back into position when they do. This was really only an issue during initial install, so just be cautious to avoid letting it bend the wrong way. The plastic end caps on the lock rail can pop off, so I recommend using adhesive to hold them firmly in place.
Overall it’s great. Definitely recommend.
Tim B.
8/25/2023
Two years in and still very pleased. I get compliments frequently for the tidy appearance and minimal bed capacity impact. One more gotcha I should note: when below freezing, it’s rigid and can be difficult to roll away. Generally a minor issue for me in the mid-Atlantic mid morning sun warms it enough that it’s OK. However, having spent time in NY last winter there were times I simply couldn’t roll it away without concern about damage. If you’re in a more northerly climate, be aware.
by:
Bob
02/03/2026
Good quality but very overpriced.
by:
Mark
01/06/2026
Great fit and easy to install
by:
Roy
05/24/2022
Fit is a little tight at the latch end even after removing shims, but overall very nice and sturdy. There was some minor damage to the product when it arrived, but nothing that impacted its function or outward appearance. Much nicer than the Revolver (old name) that I had on my last truck.
25
82
true
Show More Reviews
See what our Experts say about this BAK Industries Tonneau Cover
- Is the BAKBox 2 Collapsible Truck Bed Toolbox Compatible w/ the BAK Revolver X4s Tonneau Cover? Yes, it is! I checked with BAK Industries and the BAK Revolver X4s Hard Tonneau Cover item # BAK62VR you were looking at is compatible with the BAKBox 2 Collapsible Truck Bed Toolbox item # BAK92120. I can confirm that both of these parts will fit the 2020 Chevrolet Silverado 1500 with the 5-3/4' bed length. Additionally, the tool box works with the 6-1/2' and 8' bed lengths.
view full answer... - Tonneau Cover that Can Fit 2024 GMC Sierra 1500 with Thule TracRac SR Ladder RackHey John, so the BAK Revolver tonneau covers are the ones that were designed to work with the TracRac SR sliding ladder racks like you mentioned. I am pretty sure you have a 2024 GMC Sierra 1500 but I am not sure your bed length which is needed to pick out tonneau cover. If you have a 5.5 foot bed you'd want the part # BAK62VR If you have a 6.5 foot bed you'd want the part # BAK39131 If you have an 8 foot bed you'd want the part # BAK39132 The Revolver is the only cover that is narrow...
view full answer... - Is BAK Revolver X4s Compatible With TruXedo Elevate on 2024 Silverado 1500 RSTIt is always a good idea to check and yes, it does include the BAK Revolver X4s # BAK62VR. This tonneau cover is fully compatible with the TruXedo Elevate Truck Bed Rack System for your 2024 Silverado 1500 RST.
view full answer... - What is the Difference Between # BAK62VR and # BAK34ZR for a 2024 GMC Sierra 1500 Denali?Hello Ted, Both the # BAK62VR and # BAK34ZR are a fit for the 2024 GMC Sierra 1500, but it comes down to the bed of the Sierra. The # BAK62VR is designed for the Sierra WITHOUT the CarbonPro bed, and the # BAK34ZR is designed for the Sierra WITH the CarbonPro bed. I hope this helps make your decision. I have also included a review video for you to check out as well. Happy Holidays to you and your family, from your friends here at etrailer.
view full answer... - Can I Use a Tonneau Cover with a Thule Xsporter Pro on a 2021 GMC Sierra 1500 AT4 Short BedI may have a solution for you but there is not a tonneau cover that is compatible with a Thule Xsporter Pro # TH500XTB since it uses the insides of the bed rails to mount instead of the tops of the rails. For a tonneau cover you might be able to use something like the BAK Revolver X4s Hard Tonneau Cover - Roll Up - Aluminum and Vinyl - Matte Black # BAK62VR, which is designed to fit on a 5-3/4 foot long bed of a 2021 GMC Sierra 1500, since it mounts inside the rails and has a flush profile....
view full answer... - Compatability of BAK Revolver Tonneau Cover With Yakima Overhaul Rack on 2020 Silverado 1500The Yakima OverHaul HD Ladder Rack # Y01151-5955 is compatible with Retrax XR, Pace Edwards UltraGroove, or Ford Embark LS tonneau covers. If you're set on using this ladder rack, or already have it, I recommend the RetraxONE XR Hard Tonneau Cover # RTX24YR. This is a retractable cover so you will have full bed access. It also features a locking handle so you can keep cargo secure. If you really want to use the BAK Revolver # BAK62VR then I recommend checking out the Thule TracRac SR...
view full answer... - Correct BAK Revolver X4s Hard Tonneau Cover for a 2024 GMC Sierra 1500 CarbonPro BedThe correct BAK Revolver X4s Hard Tonneau Cover for the CarbonPro bed on your 2024 GMC Sierra 1500 is the part # BAK34ZR. The part # BAK62VR you were looking at is for the same truck, but only if it does NOT have the CarbonPro bed.
view full answer... - Weight of the BAK Revolver X4s Hard Tonneau Cover for a 2023 Silverado 1500 5-3/4' BedThe BAK Revolver X4s Hard Tonneau Cover item # BAK62VR with all components weighs 75 lbs. The shipping weight is just over 80 lbs. This cover is confirmed to fit the 5-3/4' beds of the 2023 Chevy Silverado 1500.
view full answer... - Can The Leer Soft Tonneau Cover And Thule TracRac SR Be Used Together On A 2019 Chevy Silverado 1500The Leer Soft Tonneau Cover # LE76VR leaves room on the bedrails for stake pocket access so that the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-782 can fit, but we find that combinations like this tend to wear on the edge of the soft cover as you open and close it. This can prematurely wear the cover out and make it harder to seal the edges. The BAK Revolver X4s Hard Tonneau Cover # BAK62VR has a bit more of a lip on the inside of the bedrails and has been shown to be...
view full answer... - Tonneau Cover Recommendation For 2021 GMC Sierra 1500 With 5 Foot 8 Inch Short BedWe do have a tonneau cover that fits your 2021 GMC Sierra 1500 with a 5-foot, 8-inch short bed, and my favorite option that I recommend is the BAK Revolver X4s tonneau cover. There are a number of reasons I really like the Revolver, starting with its unique design, which is a roll-up hard cover, giving you the best of both worlds. It provides the strength and security of a hard tonneau cover with its 1/4" thick, aircraft-grade aluminum slats, but is super easy to use because you can just...
view full answer... - Recommended Ladder Rack for a 2023 Chevy Silverado 1500 w/ a BakFlip Tonneau Cover The Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever item # TH43002XT-782EX is compatible with some of the Bakflip tonneau covers like the Revolver X4s item # BAK62VR. This system mounts to the stake pockets so as long as your cover leaves those exposed you won't have any issues. The Thule TracRac SR item # TH43002XT-782EX has a no drill installation and a 1,250 lbs capacity. The slotted crossbars accept a wide variety of accessories and the system includes four aluminum load...
view full answer... - Best Bed Rack Option For A 2021 GMC Sierra 1500 5-3/4 Bed With A BAK Revolver X4s Cover InstalledWe definitely have options for adding a ladder rack to your 2021 GMC Sierra 1500 with the 5-3/4 foot bed and the BAK Revolver X4s # BAK62VR installed. This cover, which I also really like, sits inside the bed rails and as it rolls up instead of folding, makes getting a ladder rack to fit with it a lot easier. For said rack, the Thule TracRac SR # TH43002XT-782 will be the most heavy duty option we have that will fit and is rated to carry up to 1,250 pounds. One of the really cool features...
view full answer... - What Tonneau Cover and Bike Rack do You Recommend for My 2022 Silverado 1500 with MultiFlex TailgateFor a great tonneau cover for your 2022 Chevy Silverado 1500 Limited with a 5-3/4 ft. bed and multi-flex tailgate, I recommend the BAK Revolver X4s Hard Tonneau Cover - Roll Up # BAK62VR. Not only will this cover fit with your tailgate, it involves an easy bolt-on installation inside your truck's bed rails. It also comes with a tailgate lock and is 100% made in the U.S.A. From the available specs I have on your 2022 Silverado 1500 LTD, it looks like you have a factory hitch. As far as...
view full answer... - Recommended Ladder Rack and Tonneau Combination for 2021 Chevy Silverado 1500In order to use a ladder rack like the Thule TracRac SR Sliding Rack # TH43002XT-782 to carry your kayaks while also having a tonneau cover, I recommend using the BAK Revolver X4s # BAK62VR. This ladder rack and tonneau cover are compatible since the Revolver X4s mounts inside the bed rails and the TracRac SR mounts on top of the rails. I really like that the TracRac sits above the cab, so it's great for carrying kayaks and will keep them from scratching up the roof of the cab. The Revolver...
view full answer... - Which BAK Revolver X4S Roll-Up Tonneau Cover Fits A 2021 Silvarado Crew Cab 5-3/4' Bed?Yes, I confirmed with BAK that the BAK Revolver X4s Hard Tonneau Cover Roll Up # BAK62VR will fit your 2021 Chevy Silverado as long as it has the 5-3/4' bed. This is an excellent tonneau cover that offers the durability of a hard cover, but also the roll-up feature of a soft cover.
view full answer... - Thule TracRac SR for 2019 Chevy Silverado Trail BossThe issue we're going to run into is that the BAKflip MX4 # BAK448130, is not a great fit for the Thule TracRac SR # TH43002XT-782 because the wide rails on the TracRac SR overlap with the seals on the MX4. In addition to this, you would need to move the rear rack forward in order to fold the cover up each time and with continuous use the seals on the cover will wear out. The only confirmed tonneau cover that will work with the Thule TracRac SR is the BAK Revolver X4s # BAK62VR, which...
view full answer...
Do you have a question about this Tonneau Cover?
Info for this part was:
Video Edited:
Chris R
Updated by:
Wilson B
Written by:
Matthew S
Edited by:
Daron K
Test Fit:
Aidan B
Video by:
John S
Installed by:
Evangeline M
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jerry
9/20/2025
One year later and still doing well. I highly recommend them & would purchase again.