Installation of BedSlide Sliding Truck Bed Tray w/ T-Tracks

Question

Question:

how is this one installed ?

asked by: Shawn

0

Expert Reply:

Hi Shawn; installation of the BedSlide Sliding Truck Bed Tray w/ T-Tracks # BE46UV will require drilling. The frame the tray sits on will be attached to the truck bed using rivnuts. I went ahead and attached an installation video from another BedSlide below so you can see what the process is like.

expert reply by: Robin H

0

Answer 1

Yes, it does Gary! The Blue Ox Base Plate Kit item #BLU86HR has been confirmed to fit the 2025 Ford Maverick hybrid. I have linked a installation video below along with the instructions so you can see how to get it set up. If you have any additional…

view full answer...

Answer 2

Hey Tony, The etrailer Hard Tonneau Cover #e55DR does not come with a built in lock, but if you lock the tailgate of your truck then no would would be able to open the cover without damaging it or the tailgate.

view full answer...

Answer 3

Yes you could replace the Progressive Dynamics Inteli-Power Converter part #PD9145A with the part #PD9245C and you'd gain the smart battery charger feature over the standard charger. This is basically a multi-stage charging setup that optimizes…

view full answer...

Answer 4

Hey Donziman, so we have three different options for base plate kits that fit your 2024 Ford Maverick. We have the Roadmaster #RM97RR, the Demco #DM77YV, and the Blue Ox #BLU86HR. We don't have an etrailer base plate kit available but (spoiler…

view full answer...

Answer 5

There are a few differences between the BAK Revolver X2 and X4s tonneau covers. The X4s is the newest cover available by BAK, so it includes a new matte black finish on all sides, whereas the X2 will be matte on the top, and then silver on the…

view full answer...

Answer 6

Both tonneau covers you mentioned do fit your 2023 Ford Maverick and the difference is the material the cover is made out of, its finish, as well as the warranty. - Woven Fabric - Matte Black Finish: TruXedo Sentry CT Tonneau Cover #TX43TV - Vinyl -…

view full answer...

Answer 7

Hey there Harry, that's a good question, as the difference is the strength of the aluminum vs. polycarbonate Retrax tonneau covers that fit your 2024 Ram 3500 with a 6-1/2 foot bed. The aluminum RetraxPRO MX Hard Tonneau Cover #RT80232 has the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The installation instructions for the Air Lift 1000 Air Helper Springs for Coil Springs #AL42WQ which fit your 2023 Ford Maverick AWD are linked near the bottom of this page.

view full answer...

Answer 10

The Replacement PlusNut Hardware Kit, part #Y8880039 you asked about are 10-32 mm with a thread pitch of .75 inch according to our contact at Yakima.

view full answer...

Answer 11

Hi Tom; the CargoGlide 1000 Sliding Tray for Trucks #CG1000-9548 weighs 175 lbs. This is confirmed to fit your 2024 GMC Sierra 1500 long bed.

view full answer...

Installation of BedSlide Sliding Truck Bed Tray w/ T-Tracks

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching