Replacement Bearings, Grease Seals, And Brake Assemblies For Lippert Trailer Axle 167806
Updated 06/03/2024 | Published 05/28/2024
Products Featured in This Question
Question:
I am looking for a self adjusting brake setup and bearings for 2 lippert axles that appear to be part number 167806. This is on a 2011 CrossRoads Cruiser CTX 29bhs
asked by: Shawn S
Expert Reply:
Hey Shawn,
Based on the 167806 part number you provided you should have 5,200lb axles. Lippert used to offer 5,200lb hubs/drums with these axles but later dropped them and switched to just 6k hub/drums so I'll have two different outer bearings depending on the hub that you have:
5,200lb Hub/Drum outer bearing # LM67048 race # LM67010
6,000lb Hub/Drum outer bearing # 15123 race # 15245
Inner bearing for both hubs # 25580 race # 25520
Grease seal for both hubs # GS-2250DL
For the brake assemblies you can use the etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K # AKEBRK-7-SA.
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Feature Review LubriMatic LMX Industrial Strength Grease
- Search Results: hitch anti~rattle
- Search Results: 5200 hub
- Video: What to Know About the Dexter Trailer Hub and Drum Assembly
- Shop: LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Bearing Kit, LM67048/25580 Bearings, 10-36 Seal
- Search Results: wire connectors wiring
- Search Results: trailer brakes
- Search Results: bearing grease
- Search Results: wire connector
- Q&A: Replacement Spindle and Hub/Drum that Fits Lippert 5,200 lb Trailer Axle
- Q&A: Recommended Hubs And Brakes For A Lippert 7,000 lb Axle
- Q&A: What Gauge Wire Should be Used to Wire Trailer Brakes
- Search Results: 10~36 seal
- Shop: TruRyde Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand Assemblies - 7K
- Shop: LubriMatic Standard Pistol Grip Grease Gun with 3-1/2" Pipe and 12" Flexible Hose
- Shop: LubriMatic Prime Guard High Temperature Wheel Bearing Grease - Red - 16-oz Can
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Q&A: Grease Seal and Bearings Recommendation for 5200 lb Lippert Axle
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Q&A: Replacement Hub/Brake Parts For a Dexter 5,200LB Axle Under 2021 Grand Design Reflection 295RL
- Q&A: Replacement of Lippert 5200lb Axle, Electric Drum Brakes, and Hub and Drum Assembly