Will The Draw-Tite Sportframe Trailer Hitch # DT86PR Fit A 2024 Honda Accord Hybrid

Question

Question:

Can this be installes on an Accord Hybrod 2024 as well?

asked by: Philip

0

Expert Reply:

Hi Philip,

Yes, the Draw-Tite Sportframe Trailer Hitch Receiver # DT86PR has been confirmed to fit hybrid models of the 2024 Honda Accord as well. If you plan on towing a small trailer or would like to add lights to a bike rack or cargo carrier for better visibility then you'll also want to pick up the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236.

expert reply by: Kevin C

0

Phil

6/1/2024

Thank you very much. This is for an e-bike rack only.

Answer 1

Hi Megan! I recommend going with the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" #C35RV you asked this question from. This will fit your 2026 Honda Accord Hybrid Touring model, and actually, all versions of Accord for this model…

view full answer...

Answer 2

Yes, the Draw-Tite Sportframe Trailer Hitch Receiver #DT86PR is confirmed to fit your 2024 Honda Accord Hybrid. And you will be able to secure the end of the 4-Way #118776 using a Mounting Bracket #18144 with the tab on the receiver.

view full answer...

Answer 3

Hey Mike, Yes, there is a 4-way trailer connector wiring kit for your 2023 Honda Accord to go with the Draw-Tite Trailer Hitch #DT86PR. What you need is the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector #C59236.

view full answer...

Answer 4

Yes, there is indeed a trailer hitch that fits your 2023 Honda Accord – both the hybrid and non-hybrid models – at the following part number: - Draw-Tite Sportframe Trailer Hitch Receiver #DT86PR

view full answer...

Answer 5

Hey Earl, Curt has told us that their hitch part #C35RV does not fit the hybrid models of the 2024 Honda Accord but we do have the very similar Draw Tite part #DT86PR that can be used on the hybrid models so that would be what I would recommend for…

view full answer...

Answer 6

Yes, it does Neil. I checked with Draw-Tite and their Sportframe Trailer Hitch item #DT86PR has been confirmed to fit all models of the 2025 Honda Accord SE including the hybrid. The Draw-Tite item #DT86PR is a class I hitch with a 1-1/4"…

view full answer...

Answer 7

Hey Josh, so the two hitches you mentioned the part #25007 and the #24972 are both pretty similar but the bolt patterns on the mounting plates are different. The distance between the top and bottom bolt holes is quite a bit different so they are not…

view full answer...

Answer 8

Hey Dave, thanks for reaching out! The hitch I recommend picking up for your 2025 Honda CR-V Hybrid is the etrailer Trailer Hitch Receiver #e98848 because of the matte black finish. This not only looks better but it's also more durable than the…

view full answer...

Answer 9

Hey Erica, thanks for reaching out! Since your 2026 Honda CR-V is a Hybrid we're a bit limited on the hitch options, and you'll need to get one that does require some fascia cutting. For this, I recommend the etrailer Trailer Hitch Receiver…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Will The Draw-Tite Sportframe Trailer Hitch # DT86PR Fit A 2024 Honda Accord Hybrid

Products Featured in This Question

Continue Researching