Is There a Plug and Play Wiring Adapter for a 2024 Jeep Grand Cherokee?

Question

Question:

Is there a plug in wiring adapter for a Tekonsha P3 controller for a 2024 Grand Cherokee with a tow package?

asked by: William L

0

Expert Reply:

No, I am sorry there is no plug and play wiring adapter to install a Tekonsha P3 item # 90195 in your 2024 Jeep Grand Cherokee. You'll need to use the included universal wiring harness to complete the installation.

expert reply by: Jerred H

0

Answer 1

Hello Josh, there sure is! What you will need is the Universal Installation Kit #ETBC7. This kit contains everything you need to upgrade the 4-flat connection to a 7-way, including all of the necessary wires for a brake controller. For the brake…

view full answer...

Answer 2

I do have an option for you but there isn't a traditional stop light switch circuit on a 2023 Jeep Grand Cherokee L. Therefore, if you want to use a wired trailer brake controller you'd need a stop light switch like the RoadMaster Stop Light…

view full answer...

Answer 3

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 6

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 7

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 8

Hey Paul, there really isn't any downside to going with the 7500 rated Air Lift kits like the part #AL57575 over the 5k rated kits aside from them costing a little more so for you I would definitely recommend the #AL57575. Are you wanting a…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Yes, there is a trailer brake controller plug on a 2023 Jeep Grand Cherokee WL. In order to utilize this you'll need a trailer brake controller like the Tekonsha BRAKE-EVN Trailer Brake Controller part #TK63VR and an adapter harness like the…

view full answer...

Answer 11

On your 2021 Jeep Grand Cherokee, in order to install a 7-way harness there needs to be a 4-way harness installed on your vehicle already. If you need that 4-way, that is the Tekonsha T-One Connector 4-Way #118727. This 4-way connector has a…

view full answer...

Answer 12

To add a 7-way to your 2022 Grand Cherokee 4XE you will need to start by adding a 4-way connector. The Curt #C27BR plugs into the connection points behind your tail lights, and will allow you to power the signal lights on a trailer. Once this is…

view full answer...

Is There a Plug and Play Wiring Adapter for a 2024 Jeep Grand Cherokee?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching