Replacement Circuit Board For a MaxxAir MaxxFan 10-21275K

Question

Question:

I’m trying to replace a max air card p/n 10-21275k. V3.8. Do you carry its replacement?

asked by: Robert D

0

10-21275K MaxxFan Circuit Board
(click to enlarge)

Expert Reply:

The Replacement Printed Circuit Board # MA10A21275K is the correct replacement for the 10-21275K circuit board in your image.

expert reply by: Bud M

0

Answer 1

Hello Randy, thanks for reaching out. I agree that replacing the circuit board and rain sensor will resolve the issue. We do have the circuit board you are looking for available as part #MA39FR. The rain sensor is part #MA34FR. A lot of times when we…

view full answer...

Answer 2

For your MaxxAir Vent Fan 4951KSC you'd need the replacement circuit board #MA10A21275K. I will say that since your vent has a rain sensor there is a good chance that could be causing your issue. If that part malfunctions it won't allow the…

view full answer...

Answer 3

The power draw of the MaxxFan part #MA00-07500K that you referenced is 5 amps or 60 watts.

view full answer...

Answer 4

The Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Reversible Fan #MA10A21275K is the correct replacement for your 8501k model and would take care of your problem.

view full answer...

Answer 5

I reached out to my tech contact at Maxxair and he said that you most likely need to replace the PC board. The Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents #MA10A21275K is the correct model for your 4700K vent and should…

view full answer...

Answer 6

For your MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - Smoke #MA00-07500K the remote screen can work and even other functions and yet not the fan could still be a remote issue. Here are things to test: Does…

view full answer...

Answer 7

Chris, from what I understand the Replacement Printed Circuit Board #MA10A21275K is still the correct circuit board replacement for your 10C21275 board, despite the looks, and will work with the MaxxFan Plus: 00-04500K, 00-04700K, 00-04800K, and…

view full answer...

Answer 8

The MaxxFan Plus Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - Smoke #MA00-04500K is the similar fan to the 4951ksc. The issue you are having with the fan and lid are likely the circuit board which can be replaced with…

view full answer...

Answer 9

Hello Dale. The circuit board in your picture looks an awful lot like the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Exhaust Only Fan #MA39FR. There are several other similar looking circuit boards though, and…

view full answer...

Answer 10

Our part number for the 10C21275KE MaxxAir MaxxFan Circuit Board is part #MA39FR. This is for the exhaust only models like your 7501K and should get your fan back up and running. I don't know what type of troubleshooting you've done with the…

view full answer...

Answer 11

Your MaxxFan Plus Roof Vent w/ 12V Fan and Thermostat - Manual Lift - 10 Speed - White #MA00-04000K could be cutting off after 10 seconds for the following reasons: 1. Insufficient or fluctuating power. Your fan could be receiving less than 12v of…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Circuit Board For a MaxxAir MaxxFan 10-21275K

Product Page this Question was Asked From

Continue Researching