Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hello Randy, thanks for reaching out. I agree that replacing the circuit board and rain sensor will resolve the issue. We do have the circuit board you are looking for available as part #MA39FR. The rain sensor is part #MA34FR. A lot of times when we…
view full answer...Before purchasing anything you'll want to first remove the cover for the air distribution box and look for the controller and the wire harness that hangs down from the rooftop unit and plugs into the controller. It will either have a 6-pin or…
view full answer...Chris, from what I understand the Replacement Printed Circuit Board #MA10A21275K is still the correct circuit board replacement for your 10C21275 board, despite the looks, and will work with the MaxxFan Plus: 00-04500K, 00-04700K, 00-04800K, and…
view full answer...Unfortunately, the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Reversible Fan #MA10A21275K you ordered would not be the correct circuit board. The correct circuit board is the Replacement Printed Circuit Board for…
view full answer...The best replacement option we offer for a Atwood GC10A-4E Water Heater is tankless, the Furrion RV Tankless Water Heater part #FR68SR. It won't be a direct replacement but still pretty easy nonetheless as they are very similar. That said, you…
view full answer...The power draw of the MaxxFan part #MA00-07500K that you referenced is 5 amps or 60 watts.
view full answer...Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…
view full answer...Hello Dale. The circuit board in your picture looks an awful lot like the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Exhaust Only Fan #MA39FR. There are several other similar looking circuit boards though, and…
view full answer...The correct circuit board for your MaxxAir MaxxFan 4951KS fan is the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS. It also works with The MaxxAir MaxxFan 4751KS and 4761KS models as well.
view full answer...I suggest pulling the 12 volt DC fuse and let it sit for 15-20 minutes to try and hard reset the 4900N MaxxFan Deluxe Roof Vent. You should check all the wires and connections for damage like corrosion, shorts or overheating. If this doesn't work…
view full answer...The photo you attached did not come though but I have attached for you a list of all the bunk ladders that we offer. If you need one with hooks then I recommend the Surco RV Bunk Ladder part #SP503B which is 60" long x 12" wide but you can…
view full answer...The correct replacement for your 300-1406 motor is the Replacement Motor for Lippert Electric Coach Step part #LC301695. If you need other components I would need more info on the steps as this specific motor fits quite a few different steps. If…
view full answer...Related Searches
Filter Your Search
Contact and Help