Does the Malone TradeSport Truck Bed Ladder Rack MAL55VR Fit a 2024 Toyota Tacoma?

Question

Question:

Does this fit a 2024 Toyota Tacoma? I had a Trac Rac system on my 2010 Toyota Tundra which the sliding rack features which really worked nice.

asked by: James

0

Expert Reply:

Yes, it does! The Malone TradeSport Truck Bed Ladder Rack w/ Load Stops item # MAL55VR fits the 2024 Toyota Tacoma with either the 5' or 6' bed lengths.

expert reply by: Jerred H

0

Answer 1

Yes! For mounting the Malone TradeSport Ladder Rack #MAL55VR to your Toyota Tacoma, you need to use the included Toyota Tacoma fit kit hardware. This kit is designed specifically for your truck. I went ahead and attached a screenshot of this fit kit…

view full answer...

Answer 2

Hey Jeff, the mounting hardware of the Malone Ladder Rack part #MAL55VR is thin enough that it wouldn't interfere with a utili track system.

view full answer...

Answer 3

Hey Bob, If your 2024 Toyota Tacoma SR5 double-cab has the Toyota utility tracks in the bed then I recommend the Yakima OverHaul HD Truck Bed Ladder Rack for Toyota/Nissan Utility Tracks #Y01151-5868. This ladder rack can adjust its height from…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hello Joe, Thanks for writing in! Based on the measurements you provided, the Gen-Y Glyder Shock Absorbing Ball Mount #325-GH-12001 is not the right fit for your setup. Since your Tundra's receiver measures 18 inches from the ground and your TAB…

view full answer...

Answer 7

Sure, I can help with that. I can see why the fitment notes are confusing. For a 2012 Toyota Tundra with the factory tow package and factory 7 way connector, you'll want a brake controller that plugs into the factory brake controller port under…

view full answer...

Answer 8

Great question John, and I can see why that would be confusing at first glance. Most of the Malone TradeSport Truck Bed Ladder Racks like part #MAL55VR do not come pre-drilled at the base. To attach it to the tonneau adapter brackets, you will need…

view full answer...

Answer 9

Hey Todd! Yes, the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters #Y01151-5755 is compatible with the Synetic MR Retractable PRO Tonneau Cover on your 2025 Toyota Tacoma. The adapters will fit the T-slot rails on that…

view full answer...

Answer 10

Hello again Monty; I would get the black SumoSprings Custom Helper Springs #SS66PV. These have a capacity of 1,800 lbs so it gives you a bit over the blue without overdoing it. SumoSprings are a great choice if you don't want to go with the air…

view full answer...

Answer 11

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 12

Hey Daniel congrats on the new truck! The Lomax Stance Hard Tonneau Cover item #LOM54RV does indeed fit the 2026 Chevrolet Silverado EV with the Mid Gate. It also works with the Multi-Flex Tailgate that comes on the Trail Boss models. For a…

view full answer...

Does the Malone TradeSport Truck Bed Ladder Rack MAL55VR Fit a 2024 Toyota Tacoma?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching