Could Malone Ladder Rack part # MAL55VR Work with Utili Track

Question

Question:

Does this rack work on trucks with utility track systems?

asked by: Jeff R

0

Expert Reply:

Hey Jeff, the mounting hardware of the Malone Ladder Rack part # MAL55VR is thin enough that it wouldn't interfere with a utili track system.

expert reply by: Jameson C

0

Answer 1

Yes! For mounting the Malone TradeSport Ladder Rack #MAL55VR to your Toyota Tacoma, you need to use the included Toyota Tacoma fit kit hardware. This kit is designed specifically for your truck. I went ahead and attached a screenshot of this fit kit…

view full answer...

Answer 2

Yes, it does! The Malone TradeSport Truck Bed Ladder Rack w/ Load Stops item #MAL55VR fits the 2024 Toyota Tacoma with either the 5' or 6' bed lengths.

view full answer...

Answer 3

Hey Bob, If your 2024 Toyota Tacoma SR5 double-cab has the Toyota utility tracks in the bed then I recommend the Yakima OverHaul HD Truck Bed Ladder Rack for Toyota/Nissan Utility Tracks #Y01151-5868. This ladder rack can adjust its height from…

view full answer...

Answer 4

The Malone Axis Truck Bed and Roof Load Extender with Load Roller #MAL32VR will allow you to more easily load your canoe on the Malone TradeSport Truck Bed Ladder Rack #MAL55VR. This roller also acts as an extension to provide a more stable platform…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Sean, yes you can use the TowSmart Adjustable Ball Mount #TS89VR in the Gen-Y Voyager Ball Mount #GY52JJ. This will provide cushioning to the adjustable ball mount plus some additional drop. What are you planning on towing with this setup?

view full answer...

Answer 8

Hey Todd! Yes, the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters #Y01151-5755 is compatible with the Synetic MR Retractable PRO Tonneau Cover on your 2025 Toyota Tacoma. The adapters will fit the T-slot rails on that…

view full answer...

Answer 9

Hey Jesse, cool name! I see you already got the Redarc #RED82CR on order but I wanted to reach out and make sure your question was answered. Yes, it does come with the mounting panel for the knob, so you won't need to buy that separately. It…

view full answer...

Answer 10

Hey Michael, sure can! For a 5' Leer topper, I am thinking the 55" long x 49" wide LockNLoad platform will be the best bet and will fit comfortably on the topper. Here is a list of all the parts you will need for that: - Yakima 54"…

view full answer...

Answer 11

Yes, Jeff, your 2024 Tacoma TRD is a great match, as is any vehicle with a 7 way connector on the back. You’ll just want to use the Redarc #RED57AR and you won't need anything else. It connects in front of the 7 way outlet on your vehicle, then…

view full answer...

Answer 12

I looked up your Dexter axle info and you have a 3,500 lb Torflex axle which the part #K71-707-01 would be the correct lift kit for. This will give you a lift of 2-5/8 inches.

view full answer...

Could Malone Ladder Rack part # MAL55VR Work with Utili Track

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching