Do You Carry Any Circuit Boards For a Dometic FanTastic Roof Vent Fan?

Question

Question:

Do you have Fan -tistic fan circuit board or know where i can purchase one

asked by: Eamon J

0

Expert Reply:

The only circuit boards we carry for FanTastic vents are on the Upgrade Kits # FV807359 and # FV807357. We do not carry the circuit board as a separate item at this time.

expert reply by: Bud M

0

Answer 1

Hey Rick, sorry to hear about your Fan-Tastic roof vent having issues. We do have a solution for needing to replace the circuit board but the only way to accomplish that is to go with the upgrade kit part #FV807357 which basically replaces the inner…

view full answer...

Answer 2

The Blue Ox #BLU79FR tow bar wiring kit is a fit for the 2018+ Jeep Wrangler JL, and wouldn't fit your 2017 JK. The good news is, we do offer a plug and play option that will work with your JK. I'd recommend the Hopkins #HM56200 which would…

view full answer...

Answer 3

The Replacement Manual Lift Control Knob part #FVK1140-09 is actually the redesigned version of the flower shaped knob that you have now. The flower shaped version you have is no longer available but the above will work unless you need to still be…

view full answer...

Answer 4

If you have the clamp-on style, you need the Fan-Tastic Vent Roof Vent Assembly Upgrade Kit #FV807357. If you have the high or low style base you want the #FV807359. The upgrade kit includes the control board and is the only way to replace it since…

view full answer...

Answer 5

Since everything works aside from the power lift, and the motor didn't fix the problem, I would say it is a bad control board. You could certainly test the switch for power if you want, but it isn't available as a separate replacement. The…

view full answer...

Answer 6

The number ( 411 D) you provided doesn't correspond with a Fan-Tastic Vent roof vent model number, but if yours uses the remote control #FV9068-09 that you referenced, that tells us it's a 7350 Series Fan-Tastic Vent Roof Vent, like…

view full answer...

Answer 7

I spoke with Dometic and they reccommend that you triple check that you have followed the instrucitons exactly they way they are as there is a jumper cable that is meant to be installed if you have the pancake style motor, and if left out you will…

view full answer...

Answer 8

That does not sound fun to deal with, I have a solution for you though. It sounds like either the remote needs to be reset or you do not have proper voltage going to the unit. To reprogram the remote hold it at least 12 inches or closer to the…

view full answer...

Answer 9

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Do You Carry Any Circuit Boards For a Dometic FanTastic Roof Vent Fan?

Products Featured in This Question

Continue Researching